\n *
\n * \n * {{ number }}\n *
\n * \n * Fade me in out\n *
\n * \n * \n * ```\n *\n * Notice the CSS class **fade**? We can now create the CSS transition code that references this class:\n *\n * ```css\n * /* The starting CSS styles for the enter animation */\n * .fade.ng-enter {\n * transition:0.5s linear all;\n * opacity:0;\n * }\n *\n * /* The finishing CSS styles for the enter animation */\n * .fade.ng-enter.ng-enter-active {\n * opacity:1;\n * }\n * ```\n *\n * The key thing to remember here is that, depending on the animation event (which each of the directives above trigger depending on what's going on) two\n * generated CSS classes will be applied to the element; in the example above we have `.ng-enter` and `.ng-enter-active`. For CSS transitions, the transition\n * code **must** be defined within the starting CSS class (in this case `.ng-enter`). The destination class is what the transition will animate towards.\n *\n * If for example we wanted to create animations for `leave` and `move` (ngRepeat triggers move) then we can do so using the same CSS naming conventions:\n *\n * ```css\n * /* now the element will fade out before it is removed from the DOM */\n * .fade.ng-leave {\n * transition:0.5s linear all;\n * opacity:1;\n * }\n * .fade.ng-leave.ng-leave-active {\n * opacity:0;\n * }\n * ```\n *\n * We can also make use of **CSS Keyframes** by referencing the keyframe animation within the starting CSS class:\n *\n * ```css\n * /* there is no need to define anything inside of the destination\n * CSS class since the keyframe will take charge of the animation */\n * .fade.ng-leave {\n * animation: my_fade_animation 0.5s linear;\n * -webkit-animation: my_fade_animation 0.5s linear;\n * }\n *\n * @keyframes my_fade_animation {\n * from { opacity:1; }\n * to { opacity:0; }\n * }\n *\n * @-webkit-keyframes my_fade_animation {\n * from { opacity:1; }\n * to { opacity:0; }\n * }\n * ```\n *\n * Feel free also mix transitions and keyframes together as well as any other CSS classes on the same element.\n *\n * ### CSS Class-based Animations\n *\n * Class-based animations (animations that are triggered via `ngClass`, `ngShow`, `ngHide` and some other directives) have a slightly different\n * naming convention. Class-based animations are basic enough that a standard transition or keyframe can be referenced on the class being added\n * and removed.\n *\n * For example if we wanted to do a CSS animation for `ngHide` then we place an animation on the `.ng-hide` CSS class:\n *\n * ```html\n * \n * Show and hide me\n *
\n * \n *\n * \n * ```\n *\n * All that is going on here with ngShow/ngHide behind the scenes is the `.ng-hide` class is added/removed (when the hidden state is valid). Since\n * ngShow and ngHide are animation aware then we can match up a transition and ngAnimate handles the rest.\n *\n * In addition the addition and removal of the CSS class, ngAnimate also provides two helper methods that we can use to further decorate the animation\n * with CSS styles.\n *\n * ```html\n * \n * Highlight this box\n *
\n * \n *\n * \n * ```\n *\n * We can also make use of CSS keyframes by placing them within the CSS classes.\n *\n *\n * ### CSS Staggering Animations\n * A Staggering animation is a collection of animations that are issued with a slight delay in between each successive operation resulting in a\n * curtain-like effect. The ngAnimate module (versions >=1.2) supports staggering animations and the stagger effect can be\n * performed by creating a **ng-EVENT-stagger** CSS class and attaching that class to the base CSS class used for\n * the animation. The style property expected within the stagger class can either be a **transition-delay** or an\n * **animation-delay** property (or both if your animation contains both transitions and keyframe animations).\n *\n * ```css\n * .my-animation.ng-enter {\n * /* standard transition code */\n * transition: 1s linear all;\n * opacity:0;\n * }\n * .my-animation.ng-enter-stagger {\n * /* this will have a 100ms delay between each successive leave animation */\n * transition-delay: 0.1s;\n *\n * /* As of 1.4.4, this must always be set: it signals ngAnimate\n * to not accidentally inherit a delay property from another CSS class */\n * transition-duration: 0s;\n *\n * /* if you are using animations instead of transitions you should configure as follows:\n * animation-delay: 0.1s;\n * animation-duration: 0s; */\n * }\n * .my-animation.ng-enter.ng-enter-active {\n * /* standard transition styles */\n * opacity:1;\n * }\n * ```\n *\n * Staggering animations work by default in ngRepeat (so long as the CSS class is defined). Outside of ngRepeat, to use staggering animations\n * on your own, they can be triggered by firing multiple calls to the same event on $animate. However, the restrictions surrounding this\n * are that each of the elements must have the same CSS className value as well as the same parent element. A stagger operation\n * will also be reset if one or more animation frames have passed since the multiple calls to `$animate` were fired.\n *\n * The following code will issue the **ng-leave-stagger** event on the element provided:\n *\n * ```js\n * var kids = parent.children();\n *\n * $animate.leave(kids[0]); //stagger index=0\n * $animate.leave(kids[1]); //stagger index=1\n * $animate.leave(kids[2]); //stagger index=2\n * $animate.leave(kids[3]); //stagger index=3\n * $animate.leave(kids[4]); //stagger index=4\n *\n * window.requestAnimationFrame(function() {\n * //stagger has reset itself\n * $animate.leave(kids[5]); //stagger index=0\n * $animate.leave(kids[6]); //stagger index=1\n *\n * $scope.$digest();\n * });\n * ```\n *\n * Stagger animations are currently only supported within CSS-defined animations.\n *\n * ### The `ng-animate` CSS class\n *\n * When ngAnimate is animating an element it will apply the `ng-animate` CSS class to the element for the duration of the animation.\n * This is a temporary CSS class and it will be removed once the animation is over (for both JavaScript and CSS-based animations).\n *\n * Therefore, animations can be applied to an element using this temporary class directly via CSS.\n *\n * ```css\n * .zipper.ng-animate {\n * transition:0.5s linear all;\n * }\n * .zipper.ng-enter {\n * opacity:0;\n * }\n * .zipper.ng-enter.ng-enter-active {\n * opacity:1;\n * }\n * .zipper.ng-leave {\n * opacity:1;\n * }\n * .zipper.ng-leave.ng-leave-active {\n * opacity:0;\n * }\n * ```\n *\n * (Note that the `ng-animate` CSS class is reserved and it cannot be applied on an element directly since ngAnimate will always remove\n * the CSS class once an animation has completed.)\n *\n *\n * ### The `ng-[event]-prepare` class\n *\n * This is a special class that can be used to prevent unwanted flickering / flash of content before\n * the actual animation starts. The class is added as soon as an animation is initialized, but removed\n * before the actual animation starts (after waiting for a $digest).\n * It is also only added for *structural* animations (`enter`, `move`, and `leave`).\n *\n * In practice, flickering can appear when nesting elements with structural animations such as `ngIf`\n * into elements that have class-based animations such as `ngClass`.\n *\n * ```html\n * \n *
\n * ```\n *\n * It is possible that during the `enter` animation, the `.message` div will be briefly visible before it starts animating.\n * In that case, you can add styles to the CSS that make sure the element stays hidden before the animation starts:\n *\n * ```css\n * .message.ng-enter-prepare {\n * opacity: 0;\n * }\n * ```\n *\n * ### Animating between value changes\n *\n * Sometimes you need to animate between different expression states, whose values\n * don't necessary need to be known or referenced in CSS styles.\n * Unless possible with another {@link ngAnimate#directive-support \"animation aware\" directive},\n * that specific use case can always be covered with {@link ngAnimate.directive:ngAnimateSwap} as\n * can be seen in {@link ngAnimate.directive:ngAnimateSwap#examples this example}.\n *\n * Note that {@link ngAnimate.directive:ngAnimateSwap} is a *structural directive*, which means it\n * creates a new instance of the element (including any other/child directives it may have) and\n * links it to a new scope every time *swap* happens. In some cases this might not be desirable\n * (e.g. for performance reasons, or when you wish to retain internal state on the original\n * element instance).\n *\n * ## JavaScript-based Animations\n *\n * ngAnimate also allows for animations to be consumed by JavaScript code. The approach is similar to CSS-based animations (where there is a shared\n * CSS class that is referenced in our HTML code) but in addition we need to register the JavaScript animation on the module. By making use of the\n * `module.animation()` module function we can register the animation.\n *\n * Let's see an example of a enter/leave animation using `ngRepeat`:\n *\n * ```html\n * \n * ```\n *\n * See the **slide** CSS class? Let's use that class to define an animation that we'll structure in our module code by using `module.animation`:\n *\n * ```js\n * myModule.animation('.slide', [function() {\n * return {\n * // make note that other events (like addClass/removeClass)\n * // have different function input parameters\n * enter: function(element, doneFn) {\n * jQuery(element).fadeIn(1000, doneFn);\n *\n * // remember to call doneFn so that AngularJS\n * // knows that the animation has concluded\n * },\n *\n * move: function(element, doneFn) {\n * jQuery(element).fadeIn(1000, doneFn);\n * },\n *\n * leave: function(element, doneFn) {\n * jQuery(element).fadeOut(1000, doneFn);\n * }\n * }\n * }]);\n * ```\n *\n * The nice thing about JS-based animations is that we can inject other services and make use of advanced animation libraries such as\n * greensock.js and velocity.js.\n *\n * If our animation code class-based (meaning that something like `ngClass`, `ngHide` and `ngShow` triggers it) then we can still define\n * our animations inside of the same registered animation, however, the function input arguments are a bit different:\n *\n * ```html\n * \n * \n *
\n * \n * this box is moody\n *
\n * \n * \n * \n * ```\n *\n * ```js\n * myModule.animation('.colorful', [function() {\n * return {\n * addClass: function(element, className, doneFn) {\n * // do some cool animation and call the doneFn\n * },\n * removeClass: function(element, className, doneFn) {\n * // do some cool animation and call the doneFn\n * },\n * setClass: function(element, addedClass, removedClass, doneFn) {\n * // do some cool animation and call the doneFn\n * }\n * }\n * }]);\n * ```\n *\n * ## CSS + JS Animations Together\n *\n * AngularJS 1.4 and higher has taken steps to make the amalgamation of CSS and JS animations more flexible. However, unlike earlier versions of AngularJS,\n * defining CSS and JS animations to work off of the same CSS class will not work anymore. Therefore the example below will only result in **JS animations taking\n * charge of the animation**:\n *\n * ```html\n * \n * ```\n *\n * ```js\n * myModule.animation('.slide', [function() {\n * return {\n * enter: function(element, doneFn) {\n * jQuery(element).slideIn(1000, doneFn);\n * }\n * }\n * }]);\n * ```\n *\n * ```css\n * .slide.ng-enter {\n * transition:0.5s linear all;\n * transform:translateY(-100px);\n * }\n * .slide.ng-enter.ng-enter-active {\n * transform:translateY(0);\n * }\n * ```\n *\n * Does this mean that CSS and JS animations cannot be used together? Do JS-based animations always have higher priority? We can make up for the\n * lack of CSS animations by using the `$animateCss` service to trigger our own tweaked-out, CSS-based animations directly from\n * our own JS-based animation code:\n *\n * ```js\n * myModule.animation('.slide', ['$animateCss', function($animateCss) {\n * return {\n * enter: function(element) {\n* // this will trigger `.slide.ng-enter` and `.slide.ng-enter-active`.\n * return $animateCss(element, {\n * event: 'enter',\n * structural: true\n * });\n * }\n * }\n * }]);\n * ```\n *\n * The nice thing here is that we can save bandwidth by sticking to our CSS-based animation code and we don't need to rely on a 3rd-party animation framework.\n *\n * The `$animateCss` service is very powerful since we can feed in all kinds of extra properties that will be evaluated and fed into a CSS transition or\n * keyframe animation. For example if we wanted to animate the height of an element while adding and removing classes then we can do so by providing that\n * data into `$animateCss` directly:\n *\n * ```js\n * myModule.animation('.slide', ['$animateCss', function($animateCss) {\n * return {\n * enter: function(element) {\n * return $animateCss(element, {\n * event: 'enter',\n * structural: true,\n * addClass: 'maroon-setting',\n * from: { height:0 },\n * to: { height: 200 }\n * });\n * }\n * }\n * }]);\n * ```\n *\n * Now we can fill in the rest via our transition CSS code:\n *\n * ```css\n * /* the transition tells ngAnimate to make the animation happen */\n * .slide.ng-enter { transition:0.5s linear all; }\n *\n * /* this extra CSS class will be absorbed into the transition\n * since the $animateCss code is adding the class */\n * .maroon-setting { background:red; }\n * ```\n *\n * And `$animateCss` will figure out the rest. Just make sure to have the `done()` callback fire the `doneFn` function to signal when the animation is over.\n *\n * To learn more about what's possible be sure to visit the {@link ngAnimate.$animateCss $animateCss service}.\n *\n * ## Animation Anchoring (via `ng-animate-ref`)\n *\n * ngAnimate in AngularJS 1.4 comes packed with the ability to cross-animate elements between\n * structural areas of an application (like views) by pairing up elements using an attribute\n * called `ng-animate-ref`.\n *\n * Let's say for example we have two views that are managed by `ng-view` and we want to show\n * that there is a relationship between two components situated in within these views. By using the\n * `ng-animate-ref` attribute we can identify that the two components are paired together and we\n * can then attach an animation, which is triggered when the view changes.\n *\n * Say for example we have the following template code:\n *\n * ```html\n * \n * \n *
\n *\n * \n * \n * ![](\"./banner.jpg\")
\n * \n *\n * \n * \n * ```\n *\n * Now, when the view changes (once the link is clicked), ngAnimate will examine the\n * HTML contents to see if there is a match reference between any components in the view\n * that is leaving and the view that is entering. It will scan both the view which is being\n * removed (leave) and inserted (enter) to see if there are any paired DOM elements that\n * contain a matching ref value.\n *\n * The two images match since they share the same ref value. ngAnimate will now create a\n * transport element (which is a clone of the first image element) and it will then attempt\n * to animate to the position of the second image element in the next view. For the animation to\n * work a special CSS class called `ng-anchor` will be added to the transported element.\n *\n * We can now attach a transition onto the `.banner.ng-anchor` CSS class and then\n * ngAnimate will handle the entire transition for us as well as the addition and removal of\n * any changes of CSS classes between the elements:\n *\n * ```css\n * .banner.ng-anchor {\n * /* this animation will last for 1 second since there are\n * two phases to the animation (an `in` and an `out` phase) */\n * transition:0.5s linear all;\n * }\n * ```\n *\n * We also **must** include animations for the views that are being entered and removed\n * (otherwise anchoring wouldn't be possible since the new view would be inserted right away).\n *\n * ```css\n * .view-animation.ng-enter, .view-animation.ng-leave {\n * transition:0.5s linear all;\n * position:fixed;\n * left:0;\n * top:0;\n * width:100%;\n * }\n * .view-animation.ng-enter {\n * transform:translateX(100%);\n * }\n * .view-animation.ng-leave,\n * .view-animation.ng-enter.ng-enter-active {\n * transform:translateX(0%);\n * }\n * .view-animation.ng-leave.ng-leave-active {\n * transform:translateX(-100%);\n * }\n * ```\n *\n * Now we can jump back to the anchor animation. When the animation happens, there are two stages that occur:\n * an `out` and an `in` stage. The `out` stage happens first and that is when the element is animated away\n * from its origin. Once that animation is over then the `in` stage occurs which animates the\n * element to its destination. The reason why there are two animations is to give enough time\n * for the enter animation on the new element to be ready.\n *\n * The example above sets up a transition for both the in and out phases, but we can also target the out or\n * in phases directly via `ng-anchor-out` and `ng-anchor-in`.\n *\n * ```css\n * .banner.ng-anchor-out {\n * transition: 0.5s linear all;\n *\n * /* the scale will be applied during the out animation,\n * but will be animated away when the in animation runs */\n * transform: scale(1.2);\n * }\n *\n * .banner.ng-anchor-in {\n * transition: 1s linear all;\n * }\n * ```\n *\n *\n *\n *\n * ### Anchoring Demo\n *\n \n
\n \n
\n Welcome to the home page\n
Please click on an element
\n \n {{ record.title }}\n \n\n {{ profile.title }}\n
\n \n Snippet: \n \n
\n
\n | Directive | \nHow | \nSource | \nRendered | \n
| ng-bind-html | \nAutomatically uses $sanitize | \n<div ng-bind-html=\"snippet\"> | \n \n |
| ng-bind-html | \nBypass $sanitize by explicitly trusting the dangerous value | \n\n <div ng-bind-html=\"deliberatelyTrustDangerousSnippet()\">\n</div>\n | \n \n |
| ng-bind | \nAutomatically escapes | \n<div ng-bind=\"snippet\"> | \n \n |
an html\\nclick here\\nsnippet
');\n });\n\n it('should inline raw snippet if bound to a trusted value', function() {\n expect(element(by.css('#bind-html-with-trust div')).getAttribute('innerHTML')).\n toBe(\"an html\\n\" +\n \"click here\\n\" +\n \"snippet
\");\n });\n\n it('should escape snippet without any filter', function() {\n expect(element(by.css('#bind-default div')).getAttribute('innerHTML')).\n toBe(\"<p style=\\\"color:blue\\\">an html\\n\" +\n \"<em onmouseover=\\\"this.textContent='PWN3D!'\\\">click here</em>\\n\" +\n \"snippet</p>\");\n });\n\n it('should update', function() {\n element(by.model('snippet')).clear();\n element(by.model('snippet')).sendKeys('new text');\n expect(element(by.css('#bind-html-with-sanitize div')).getAttribute('innerHTML')).\n toBe('new text');\n expect(element(by.css('#bind-html-with-trust div')).getAttribute('innerHTML')).toBe(\n 'new text');\n expect(element(by.css('#bind-default div')).getAttribute('innerHTML')).toBe(\n \"new <b onclick=\\\"alert(1)\\\">text</b>\");\n });\n\n *
\n *\n *
\n *\n * @param {boolean=} flag Enable or disable SVG support in the sanitizer.\n * @returns {boolean|$sanitizeProvider} Returns the currently configured value if called\n * without an argument or self for chaining otherwise.\n */\n this.enableSvg = function(enableSvg) {\n if (isDefined(enableSvg)) {\n svgEnabled = enableSvg;\n return this;\n } else {\n return svgEnabled;\n }\n };\n\n\n /**\n * @ngdoc method\n * @name $sanitizeProvider#addValidElements\n * @kind function\n *\n * @description\n * Extends the built-in lists of valid HTML/SVG elements, i.e. elements that are considered safe\n * and are not stripped off during sanitization. You can extend the following lists of elements:\n *\n * - `htmlElements`: A list of elements (tag names) to extend the current list of safe HTML\n * elements. HTML elements considered safe will not be removed during sanitization. All other\n * elements will be stripped off.\n *\n * - `htmlVoidElements`: This is similar to `htmlElements`, but marks the elements as\n * \"void elements\" (similar to HTML\n * [void elements](https://rawgit.com/w3c/html/html5.1-2/single-page.html#void-elements)). These\n * elements have no end tag and cannot have content.\n *\n * - `svgElements`: This is similar to `htmlElements`, but for SVG elements. This list is only\n * taken into account if SVG is {@link ngSanitize.$sanitizeProvider#enableSvg enabled} for\n * `$sanitize`.\n *\n * By enabling this setting without taking other precautions, you might expose your\n * application to click-hijacking attacks. In these attacks, sanitized svg elements could be positioned\n * outside of the containing element and be rendered over other elements on the page (e.g. a login\n * link). Such behavior can then result in phishing incidents.
\n *\n *To protect against these, explicitly setup `overflow: hidden` css rule for all potential svg\n * tags within the sanitized content:
\n *\n *\n *\n *
\n * .rootOfTheIncludedContent svg {\n * overflow: hidden !important;\n * }\n * \n * This method must be called during the {@link angular.Module#config config} phase. Once the\n * `$sanitize` service has been instantiated, this method has no effect.\n *
\n *\n * \n * Keep in mind that extending the built-in lists of elements may expose your app to XSS or\n * other vulnerabilities. Be very mindful of the elements you add.\n *
\n *\n * @param {Array\n * This method must be called during the {@link angular.Module#config config} phase. Once the\n * `$sanitize` service has been instantiated, this method has no effect.\n *
\n *\n * \n * Keep in mind that extending the built-in list of attributes may expose your app to XSS or\n * other vulnerabilities. Be very mindful of the attributes you add.\n *
\n *\n * @param {Array\n Snippet: \n \n
\n \n \n angular.module('linkyExample', ['ngSanitize'])\n .controller('ExampleController', ['$scope', function($scope) {\n $scope.snippet =\n 'Pretty text with some links:\\n' +\n 'http://angularjs.org/,\\n' +\n 'mailto:us@somewhere.org,\\n' +\n 'another@somewhere.org,\\n' +\n 'and one more: ftp://127.0.0.1/.';\n $scope.snippetWithSingleURL = 'http://angularjs.org/';\n }]);\n \n \n it('should linkify the snippet with urls', function() {\n expect(element(by.id('linky-filter')).element(by.binding('snippet | linky')).getText()).\n toBe('Pretty text with some links: http://angularjs.org/, us@somewhere.org, ' +\n 'another@somewhere.org, and one more: ftp://127.0.0.1/.');\n expect(element.all(by.css('#linky-filter a')).count()).toEqual(4);\n });\n\n it('should not linkify snippet without the linky filter', function() {\n expect(element(by.id('escaped-html')).element(by.binding('snippet')).getText()).\n toBe('Pretty text with some links: http://angularjs.org/, mailto:us@somewhere.org, ' +\n 'another@somewhere.org, and one more: ftp://127.0.0.1/.');\n expect(element.all(by.css('#escaped-html a')).count()).toEqual(0);\n });\n\n it('should update', function() {\n element(by.model('snippet')).clear();\n element(by.model('snippet')).sendKeys('new http://link.');\n expect(element(by.id('linky-filter')).element(by.binding('snippet | linky')).getText()).\n toBe('new http://link.');\n expect(element.all(by.css('#linky-filter a')).count()).toEqual(1);\n expect(element(by.id('escaped-html')).element(by.binding('snippet')).getText())\n .toBe('new http://link.');\n });\n\n it('should work with the target property', function() {\n expect(element(by.id('linky-target')).\n element(by.binding(\"snippetWithSingleURL | linky:'_blank'\")).getText()).\n toBe('http://angularjs.org/');\n expect(element(by.css('#linky-target a')).getAttribute('target')).toEqual('_blank');\n });\n\n it('should optionally add custom attributes', function() {\n expect(element(by.id('linky-custom-attributes')).\n element(by.binding(\"snippetWithSingleURL | linky:'_self':{rel: 'nofollow'}\")).getText()).\n toBe('http://angularjs.org/');\n expect(element(by.css('#linky-custom-attributes a')).getAttribute('rel')).toEqual('nofollow');\n });\n \n \n */\nangular.module('ngSanitize').filter('linky', ['$sanitize', function($sanitize) {\n var LINKY_URL_REGEXP =\n /((s?ftp|https?):\\/\\/|(www\\.)|(mailto:)?[A-Za-z0-9._%+-]+@)\\S*[^\\s.;,(){}<>\"\\u201d\\u2019]/i,\n MAILTO_REGEXP = /^mailto:/i;\n\n var linkyMinErr = angular.$$minErr('linky');\n var isDefined = angular.isDefined;\n var isFunction = angular.isFunction;\n var isObject = angular.isObject;\n var isString = angular.isString;\n\n return function(text, target, attributes) {\n if (text == null || text === '') return text;\n if (!isString(text)) throw linkyMinErr('notstring', 'Expected string but received: {0}', text);\n\n var attributesFn =\n isFunction(attributes) ? attributes :\n isObject(attributes) ? function getAttributesObject() {return attributes;} :\n function getEmptyAttributesObject() {return {};};\n\n var match;\n var raw = text;\n var html = [];\n var url;\n var i;\n while ((match = raw.match(LINKY_URL_REGEXP))) {\n // We can not end in these as they are sometimes found at the end of the sentence\n url = match[0];\n // if we did not match ftp/http/www/mailto then assume mailto\n if (!match[2] && !match[4]) {\n url = (match[3] ? 'http://' : 'mailto:') + url;\n }\n i = match.index;\n addText(raw.substr(0, i));\n addLink(url, match[0].replace(MAILTO_REGEXP, ''));\n raw = raw.substring(i + match[0].length);\n }\n addText(raw);\n return $sanitize(html.join(''));\n\n function addText(text) {\n if (!text) {\n return;\n }\n html.push(sanitizeText(text));\n }\n\n function addLink(url, text) {\n var key, linkAttributes = attributesFn(url);\n html.push('');\n addText(text);\n html.push('');\n }\n };\n}]);\n\n\n})(window, window.angular);\n","require('./angular-sanitize');\nmodule.exports = 'ngSanitize';\n","/**\n * @license AngularJS v1.8.3\n * (c) 2010-2020 Google LLC. http://angularjs.org\n * License: MIT\n */\n(function(window) {'use strict';\n\n/* exported\n minErrConfig,\n errorHandlingConfig,\n isValidObjectMaxDepth\n*/\n\nvar minErrConfig = {\n objectMaxDepth: 5,\n urlErrorParamsEnabled: true\n};\n\n/**\n * @ngdoc function\n * @name angular.errorHandlingConfig\n * @module ng\n * @kind function\n *\n * @description\n * Configure several aspects of error handling in AngularJS if used as a setter or return the\n * current configuration if used as a getter. The following options are supported:\n *\n * - **objectMaxDepth**: The maximum depth to which objects are traversed when stringified for error messages.\n *\n * Omitted or undefined options will leave the corresponding configuration values unchanged.\n *\n * @param {Object=} config - The configuration object. May only contain the options that need to be\n * updated. Supported keys:\n *\n * * `objectMaxDepth` **{Number}** - The max depth for stringifying objects. Setting to a\n * non-positive or non-numeric value, removes the max depth limit.\n * Default: 5\n *\n * * `urlErrorParamsEnabled` **{Boolean}** - Specifies whether the generated error url will\n * contain the parameters of the thrown error. Disabling the parameters can be useful if the\n * generated error url is very long.\n *\n * Default: true. When used without argument, it returns the current value.\n */\nfunction errorHandlingConfig(config) {\n if (isObject(config)) {\n if (isDefined(config.objectMaxDepth)) {\n minErrConfig.objectMaxDepth = isValidObjectMaxDepth(config.objectMaxDepth) ? config.objectMaxDepth : NaN;\n }\n if (isDefined(config.urlErrorParamsEnabled) && isBoolean(config.urlErrorParamsEnabled)) {\n minErrConfig.urlErrorParamsEnabled = config.urlErrorParamsEnabled;\n }\n } else {\n return minErrConfig;\n }\n}\n\n/**\n * @private\n * @param {Number} maxDepth\n * @return {boolean}\n */\nfunction isValidObjectMaxDepth(maxDepth) {\n return isNumber(maxDepth) && maxDepth > 0;\n}\n\n\n/**\n * @description\n *\n * This object provides a utility for producing rich Error messages within\n * AngularJS. It can be called as follows:\n *\n * var exampleMinErr = minErr('example');\n * throw exampleMinErr('one', 'This {0} is {1}', foo, bar);\n *\n * The above creates an instance of minErr in the example namespace. The\n * resulting error will have a namespaced error code of example.one. The\n * resulting error will replace {0} with the value of foo, and {1} with the\n * value of bar. The object is not restricted in the number of arguments it can\n * take.\n *\n * If fewer arguments are specified than necessary for interpolation, the extra\n * interpolation markers will be preserved in the final string.\n *\n * Since data will be parsed statically during a build step, some restrictions\n * are applied with respect to how minErr instances are created and called.\n * Instances should have names of the form namespaceMinErr for a minErr created\n * using minErr('namespace'). Error codes, namespaces and template strings\n * should all be static strings, not variables or general expressions.\n *\n * @param {string} module The namespace to use for the new minErr instance.\n * @param {function} ErrorConstructor Custom error constructor to be instantiated when returning\n * error from returned function, for cases when a particular type of error is useful.\n * @returns {function(code:string, template:string, ...templateArgs): Error} minErr instance\n */\n\nfunction minErr(module, ErrorConstructor) {\n ErrorConstructor = ErrorConstructor || Error;\n\n var url = 'https://errors.angularjs.org/1.8.3/';\n var regex = url.replace('.', '\\\\.') + '[\\\\s\\\\S]*';\n var errRegExp = new RegExp(regex, 'g');\n\n return function() {\n var code = arguments[0],\n template = arguments[1],\n message = '[' + (module ? module + ':' : '') + code + '] ',\n templateArgs = sliceArgs(arguments, 2).map(function(arg) {\n return toDebugString(arg, minErrConfig.objectMaxDepth);\n }),\n paramPrefix, i;\n\n // A minErr message has two parts: the message itself and the url that contains the\n // encoded message.\n // The message's parameters can contain other error messages which also include error urls.\n // To prevent the messages from getting too long, we strip the error urls from the parameters.\n\n message += template.replace(/\\{\\d+\\}/g, function(match) {\n var index = +match.slice(1, -1);\n\n if (index < templateArgs.length) {\n return templateArgs[index].replace(errRegExp, '');\n }\n\n return match;\n });\n\n message += '\\n' + url + (module ? module + '/' : '') + code;\n\n if (minErrConfig.urlErrorParamsEnabled) {\n for (i = 0, paramPrefix = '?'; i < templateArgs.length; i++, paramPrefix = '&') {\n message += paramPrefix + 'p' + i + '=' + encodeURIComponent(templateArgs[i]);\n }\n }\n\n return new ErrorConstructor(message);\n };\n}\n\n/* We need to tell ESLint what variables are being exported */\n/* exported\n angular,\n msie,\n jqLite,\n jQuery,\n slice,\n splice,\n push,\n toString,\n minErrConfig,\n errorHandlingConfig,\n isValidObjectMaxDepth,\n ngMinErr,\n angularModule,\n uid,\n REGEX_STRING_REGEXP,\n VALIDITY_STATE_PROPERTY,\n\n lowercase,\n uppercase,\n nodeName_,\n isArrayLike,\n forEach,\n forEachSorted,\n reverseParams,\n nextUid,\n setHashKey,\n extend,\n toInt,\n inherit,\n merge,\n noop,\n identity,\n valueFn,\n isUndefined,\n isDefined,\n isObject,\n isBlankObject,\n isString,\n isNumber,\n isNumberNaN,\n isDate,\n isError,\n isArray,\n isFunction,\n isRegExp,\n isWindow,\n isScope,\n isFile,\n isFormData,\n isBlob,\n isBoolean,\n isPromiseLike,\n trim,\n escapeForRegexp,\n isElement,\n makeMap,\n includes,\n arrayRemove,\n copy,\n simpleCompare,\n equals,\n csp,\n jq,\n concat,\n sliceArgs,\n bind,\n toJsonReplacer,\n toJson,\n fromJson,\n convertTimezoneToLocal,\n timezoneToOffset,\n addDateMinutes,\n startingTag,\n tryDecodeURIComponent,\n parseKeyValue,\n toKeyValue,\n encodeUriSegment,\n encodeUriQuery,\n angularInit,\n bootstrap,\n getTestability,\n snake_case,\n bindJQuery,\n assertArg,\n assertArgFn,\n assertNotHasOwnProperty,\n getter,\n getBlockNodes,\n hasOwnProperty,\n createMap,\n stringify,\n UNSAFE_restoreLegacyJqLiteXHTMLReplacement,\n\n NODE_TYPE_ELEMENT,\n NODE_TYPE_ATTRIBUTE,\n NODE_TYPE_TEXT,\n NODE_TYPE_COMMENT,\n NODE_TYPE_DOCUMENT,\n NODE_TYPE_DOCUMENT_FRAGMENT\n*/\n\n////////////////////////////////////\n\n/**\n * @ngdoc module\n * @name ng\n * @module ng\n * @installation\n * @description\n *\n * The ng module is loaded by default when an AngularJS application is started. The module itself\n * contains the essential components for an AngularJS application to function. The table below\n * lists a high level breakdown of each of the services/factories, filters, directives and testing\n * components available within this core module.\n *\n */\n\nvar REGEX_STRING_REGEXP = /^\\/(.+)\\/([a-z]*)$/;\n\n// The name of a form control's ValidityState property.\n// This is used so that it's possible for internal tests to create mock ValidityStates.\nvar VALIDITY_STATE_PROPERTY = 'validity';\n\n\nvar hasOwnProperty = Object.prototype.hasOwnProperty;\n\n/**\n * @private\n *\n * @description Converts the specified string to lowercase.\n * @param {string} string String to be converted to lowercase.\n * @returns {string} Lowercased string.\n */\nvar lowercase = function(string) {return isString(string) ? string.toLowerCase() : string;};\n\n/**\n * @private\n *\n * @description Converts the specified string to uppercase.\n * @param {string} string String to be converted to uppercase.\n * @returns {string} Uppercased string.\n */\nvar uppercase = function(string) {return isString(string) ? string.toUpperCase() : string;};\n\n\nvar\n msie, // holds major version number for IE, or NaN if UA is not IE.\n jqLite, // delay binding since jQuery could be loaded after us.\n jQuery, // delay binding\n slice = [].slice,\n splice = [].splice,\n push = [].push,\n toString = Object.prototype.toString,\n getPrototypeOf = Object.getPrototypeOf,\n ngMinErr = minErr('ng'),\n\n /** @name angular */\n angular = window.angular || (window.angular = {}),\n angularModule,\n uid = 0;\n\n// Support: IE 9-11 only\n/**\n * documentMode is an IE-only property\n * http://msdn.microsoft.com/en-us/library/ie/cc196988(v=vs.85).aspx\n */\nmsie = window.document.documentMode;\n\n\n/**\n * @private\n * @param {*} obj\n * @return {boolean} Returns true if `obj` is an array or array-like object (NodeList, Arguments,\n * String ...)\n */\nfunction isArrayLike(obj) {\n\n // `null`, `undefined` and `window` are not array-like\n if (obj == null || isWindow(obj)) return false;\n\n // arrays, strings and jQuery/jqLite objects are array like\n // * jqLite is either the jQuery or jqLite constructor function\n // * we have to check the existence of jqLite first as this method is called\n // via the forEach method when constructing the jqLite object in the first place\n if (isArray(obj) || isString(obj) || (jqLite && obj instanceof jqLite)) return true;\n\n // Support: iOS 8.2 (not reproducible in simulator)\n // \"length\" in obj used to prevent JIT error (gh-11508)\n var length = 'length' in Object(obj) && obj.length;\n\n // NodeList objects (with `item` method) and\n // other objects with suitable length characteristics are array-like\n return isNumber(length) && (length >= 0 && (length - 1) in obj || typeof obj.item === 'function');\n\n}\n\n/**\n * @ngdoc function\n * @name angular.forEach\n * @module ng\n * @kind function\n *\n * @description\n * Invokes the `iterator` function once for each item in `obj` collection, which can be either an\n * object or an array. The `iterator` function is invoked with `iterator(value, key, obj)`, where `value`\n * is the value of an object property or an array element, `key` is the object property key or\n * array element index and obj is the `obj` itself. Specifying a `context` for the function is optional.\n *\n * It is worth noting that `.forEach` does not iterate over inherited properties because it filters\n * using the `hasOwnProperty` method.\n *\n * Unlike ES262's\n * [Array.prototype.forEach](http://www.ecma-international.org/ecma-262/5.1/#sec-15.4.4.18),\n * providing 'undefined' or 'null' values for `obj` will not throw a TypeError, but rather just\n * return the value provided.\n *\n ```js\n var values = {name: 'misko', gender: 'male'};\n var log = [];\n angular.forEach(values, function(value, key) {\n this.push(key + ': ' + value);\n }, log);\n expect(log).toEqual(['name: misko', 'gender: male']);\n ```\n *\n * @param {Object|Array} obj Object to iterate over.\n * @param {Function} iterator Iterator function.\n * @param {Object=} context Object to become context (`this`) for the iterator function.\n * @returns {Object|Array} Reference to `obj`.\n */\n\nfunction forEach(obj, iterator, context) {\n var key, length;\n if (obj) {\n if (isFunction(obj)) {\n for (key in obj) {\n if (key !== 'prototype' && key !== 'length' && key !== 'name' && obj.hasOwnProperty(key)) {\n iterator.call(context, obj[key], key, obj);\n }\n }\n } else if (isArray(obj) || isArrayLike(obj)) {\n var isPrimitive = typeof obj !== 'object';\n for (key = 0, length = obj.length; key < length; key++) {\n if (isPrimitive || key in obj) {\n iterator.call(context, obj[key], key, obj);\n }\n }\n } else if (obj.forEach && obj.forEach !== forEach) {\n obj.forEach(iterator, context, obj);\n } else if (isBlankObject(obj)) {\n // createMap() fast path --- Safe to avoid hasOwnProperty check because prototype chain is empty\n for (key in obj) {\n iterator.call(context, obj[key], key, obj);\n }\n } else if (typeof obj.hasOwnProperty === 'function') {\n // Slow path for objects inheriting Object.prototype, hasOwnProperty check needed\n for (key in obj) {\n if (obj.hasOwnProperty(key)) {\n iterator.call(context, obj[key], key, obj);\n }\n }\n } else {\n // Slow path for objects which do not have a method `hasOwnProperty`\n for (key in obj) {\n if (hasOwnProperty.call(obj, key)) {\n iterator.call(context, obj[key], key, obj);\n }\n }\n }\n }\n return obj;\n}\n\nfunction forEachSorted(obj, iterator, context) {\n var keys = Object.keys(obj).sort();\n for (var i = 0; i < keys.length; i++) {\n iterator.call(context, obj[keys[i]], keys[i]);\n }\n return keys;\n}\n\n\n/**\n * when using forEach the params are value, key, but it is often useful to have key, value.\n * @param {function(string, *)} iteratorFn\n * @returns {function(*, string)}\n */\nfunction reverseParams(iteratorFn) {\n return function(value, key) {iteratorFn(key, value);};\n}\n\n/**\n * A consistent way of creating unique IDs in angular.\n *\n * Using simple numbers allows us to generate 28.6 million unique ids per second for 10 years before\n * we hit number precision issues in JavaScript.\n *\n * Math.pow(2,53) / 60 / 60 / 24 / 365 / 10 = 28.6M\n *\n * @returns {number} an unique alpha-numeric string\n */\nfunction nextUid() {\n return ++uid;\n}\n\n\n/**\n * Set or clear the hashkey for an object.\n * @param obj object\n * @param h the hashkey (!truthy to delete the hashkey)\n */\nfunction setHashKey(obj, h) {\n if (h) {\n obj.$$hashKey = h;\n } else {\n delete obj.$$hashKey;\n }\n}\n\n\nfunction baseExtend(dst, objs, deep) {\n var h = dst.$$hashKey;\n\n for (var i = 0, ii = objs.length; i < ii; ++i) {\n var obj = objs[i];\n if (!isObject(obj) && !isFunction(obj)) continue;\n var keys = Object.keys(obj);\n for (var j = 0, jj = keys.length; j < jj; j++) {\n var key = keys[j];\n var src = obj[key];\n\n if (deep && isObject(src)) {\n if (isDate(src)) {\n dst[key] = new Date(src.valueOf());\n } else if (isRegExp(src)) {\n dst[key] = new RegExp(src);\n } else if (src.nodeName) {\n dst[key] = src.cloneNode(true);\n } else if (isElement(src)) {\n dst[key] = src.clone();\n } else {\n if (key !== '__proto__') {\n if (!isObject(dst[key])) dst[key] = isArray(src) ? [] : {};\n baseExtend(dst[key], [src], true);\n }\n }\n } else {\n dst[key] = src;\n }\n }\n }\n\n setHashKey(dst, h);\n return dst;\n}\n\n/**\n * @ngdoc function\n * @name angular.extend\n * @module ng\n * @kind function\n *\n * @description\n * Extends the destination object `dst` by copying own enumerable properties from the `src` object(s)\n * to `dst`. You can specify multiple `src` objects. If you want to preserve original objects, you can do so\n * by passing an empty object as the target: `var object = angular.extend({}, object1, object2)`.\n *\n * **Note:** Keep in mind that `angular.extend` does not support recursive merge (deep copy). Use\n * {@link angular.merge} for this.\n *\n * @param {Object} dst Destination object.\n * @param {...Object} src Source object(s).\n * @returns {Object} Reference to `dst`.\n */\nfunction extend(dst) {\n return baseExtend(dst, slice.call(arguments, 1), false);\n}\n\n\n/**\n* @ngdoc function\n* @name angular.merge\n* @module ng\n* @kind function\n*\n* @description\n* Deeply extends the destination object `dst` by copying own enumerable properties from the `src` object(s)\n* to `dst`. You can specify multiple `src` objects. If you want to preserve original objects, you can do so\n* by passing an empty object as the target: `var object = angular.merge({}, object1, object2)`.\n*\n* Unlike {@link angular.extend extend()}, `merge()` recursively descends into object properties of source\n* objects, performing a deep copy.\n*\n* @deprecated\n* sinceVersion=\"1.6.5\"\n* This function is deprecated, but will not be removed in the 1.x lifecycle.\n* There are edge cases (see {@link angular.merge#known-issues known issues}) that are not\n* supported by this function. We suggest using another, similar library for all-purpose merging,\n* such as [lodash's merge()](https://lodash.com/docs/4.17.4#merge).\n*\n* @knownIssue\n* This is a list of (known) object types that are not handled correctly by this function:\n* - [`Blob`](https://developer.mozilla.org/docs/Web/API/Blob)\n* - [`MediaStream`](https://developer.mozilla.org/docs/Web/API/MediaStream)\n* - [`CanvasGradient`](https://developer.mozilla.org/docs/Web/API/CanvasGradient)\n* - AngularJS {@link $rootScope.Scope scopes};\n*\n* `angular.merge` also does not support merging objects with circular references.\n*\n* @param {Object} dst Destination object.\n* @param {...Object} src Source object(s).\n* @returns {Object} Reference to `dst`.\n*/\nfunction merge(dst) {\n return baseExtend(dst, slice.call(arguments, 1), true);\n}\n\n\n\nfunction toInt(str) {\n return parseInt(str, 10);\n}\n\nvar isNumberNaN = Number.isNaN || function isNumberNaN(num) {\n // eslint-disable-next-line no-self-compare\n return num !== num;\n};\n\n\nfunction inherit(parent, extra) {\n return extend(Object.create(parent), extra);\n}\n\n/**\n * @ngdoc function\n * @name angular.noop\n * @module ng\n * @kind function\n *\n * @description\n * A function that performs no operations. This function can be useful when writing code in the\n * functional style.\n ```js\n function foo(callback) {\n var result = calculateResult();\n (callback || angular.noop)(result);\n }\n ```\n */\nfunction noop() {}\nnoop.$inject = [];\n\n\n/**\n * @ngdoc function\n * @name angular.identity\n * @module ng\n * @kind function\n *\n * @description\n * A function that returns its first argument. This function is useful when writing code in the\n * functional style.\n *\n ```js\n function transformer(transformationFn, value) {\n return (transformationFn || angular.identity)(value);\n };\n\n // E.g.\n function getResult(fn, input) {\n return (fn || angular.identity)(input);\n };\n\n getResult(function(n) { return n * 2; }, 21); // returns 42\n getResult(null, 21); // returns 21\n getResult(undefined, 21); // returns 21\n ```\n *\n * @param {*} value to be returned.\n * @returns {*} the value passed in.\n */\nfunction identity($) {return $;}\nidentity.$inject = [];\n\n\nfunction valueFn(value) {return function valueRef() {return value;};}\n\nfunction hasCustomToString(obj) {\n return isFunction(obj.toString) && obj.toString !== toString;\n}\n\n\n/**\n * @ngdoc function\n * @name angular.isUndefined\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is undefined.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is undefined.\n */\nfunction isUndefined(value) {return typeof value === 'undefined';}\n\n\n/**\n * @ngdoc function\n * @name angular.isDefined\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is defined.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is defined.\n */\nfunction isDefined(value) {return typeof value !== 'undefined';}\n\n\n/**\n * @ngdoc function\n * @name angular.isObject\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is an `Object`. Unlike `typeof` in JavaScript, `null`s are not\n * considered to be objects. Note that JavaScript arrays are objects.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is an `Object` but not `null`.\n */\nfunction isObject(value) {\n // http://jsperf.com/isobject4\n return value !== null && typeof value === 'object';\n}\n\n\n/**\n * Determine if a value is an object with a null prototype\n *\n * @returns {boolean} True if `value` is an `Object` with a null prototype\n */\nfunction isBlankObject(value) {\n return value !== null && typeof value === 'object' && !getPrototypeOf(value);\n}\n\n\n/**\n * @ngdoc function\n * @name angular.isString\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is a `String`.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is a `String`.\n */\nfunction isString(value) {return typeof value === 'string';}\n\n\n/**\n * @ngdoc function\n * @name angular.isNumber\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is a `Number`.\n *\n * This includes the \"special\" numbers `NaN`, `+Infinity` and `-Infinity`.\n *\n * If you wish to exclude these then you can use the native\n * [`isFinite'](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/isFinite)\n * method.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is a `Number`.\n */\nfunction isNumber(value) {return typeof value === 'number';}\n\n\n/**\n * @ngdoc function\n * @name angular.isDate\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a value is a date.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is a `Date`.\n */\nfunction isDate(value) {\n return toString.call(value) === '[object Date]';\n}\n\n\n/**\n * @ngdoc function\n * @name angular.isArray\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is an `Array`.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is an `Array`.\n */\nfunction isArray(arr) {\n return Array.isArray(arr) || arr instanceof Array;\n}\n\n/**\n * @description\n * Determines if a reference is an `Error`.\n * Loosely based on https://www.npmjs.com/package/iserror\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is an `Error`.\n */\nfunction isError(value) {\n var tag = toString.call(value);\n switch (tag) {\n case '[object Error]': return true;\n case '[object Exception]': return true;\n case '[object DOMException]': return true;\n default: return value instanceof Error;\n }\n}\n\n/**\n * @ngdoc function\n * @name angular.isFunction\n * @module ng\n * @kind function\n *\n * @description\n * Determines if a reference is a `Function`.\n *\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is a `Function`.\n */\nfunction isFunction(value) {return typeof value === 'function';}\n\n\n/**\n * Determines if a value is a regular expression object.\n *\n * @private\n * @param {*} value Reference to check.\n * @returns {boolean} True if `value` is a `RegExp`.\n */\nfunction isRegExp(value) {\n return toString.call(value) === '[object RegExp]';\n}\n\n\n/**\n * Checks if `obj` is a window object.\n *\n * @private\n * @param {*} obj Object to check\n * @returns {boolean} True if `obj` is a window obj.\n */\nfunction isWindow(obj) {\n return obj && obj.window === obj;\n}\n\n\nfunction isScope(obj) {\n return obj && obj.$evalAsync && obj.$watch;\n}\n\n\nfunction isFile(obj) {\n return toString.call(obj) === '[object File]';\n}\n\n\nfunction isFormData(obj) {\n return toString.call(obj) === '[object FormData]';\n}\n\n\nfunction isBlob(obj) {\n return toString.call(obj) === '[object Blob]';\n}\n\n\nfunction isBoolean(value) {\n return typeof value === 'boolean';\n}\n\n\nfunction isPromiseLike(obj) {\n return obj && isFunction(obj.then);\n}\n\n\nvar TYPED_ARRAY_REGEXP = /^\\[object (?:Uint8|Uint8Clamped|Uint16|Uint32|Int8|Int16|Int32|Float32|Float64)Array]$/;\nfunction isTypedArray(value) {\n return value && isNumber(value.length) && TYPED_ARRAY_REGEXP.test(toString.call(value));\n}\n\nfunction isArrayBuffer(obj) {\n return toString.call(obj) === '[object ArrayBuffer]';\n}\n\n\nvar trim = function(value) {\n return isString(value) ? value.trim() : value;\n};\n\n// Copied from:\n// http://docs.closure-library.googlecode.com/git/local_closure_goog_string_string.js.source.html#line1021\n// Prereq: s is a string.\nvar escapeForRegexp = function(s) {\n return s\n .replace(/([-()[\\]{}+?*.$^|,:#= 0) {\n array.splice(index, 1);\n }\n return index;\n}\n\n/**\n * @ngdoc function\n * @name angular.copy\n * @module ng\n * @kind function\n *\n * @description\n * Creates a deep copy of `source`, which should be an object or an array. This functions is used\n * internally, mostly in the change-detection code. It is not intended as an all-purpose copy\n * function, and has several limitations (see below).\n *\n * * If no destination is supplied, a copy of the object or array is created.\n * * If a destination is provided, all of its elements (for arrays) or properties (for objects)\n * are deleted and then all elements/properties from the source are copied to it.\n * * If `source` is not an object or array (inc. `null` and `undefined`), `source` is returned.\n * * If `source` is identical to `destination` an exception will be thrown.\n *\n *
\n *\n *\n \n \n \n // Module: copyExample\n angular.\n module('copyExample', []).\n controller('ExampleController', ['$scope', function($scope) {\n $scope.leader = {};\n\n $scope.reset = function() {\n // Example with 1 argument\n $scope.user = angular.copy($scope.leader);\n };\n\n $scope.update = function(user) {\n // Example with 2 arguments\n angular.copy(user, $scope.leader);\n };\n\n $scope.reset();\n }]);\n \n \n */\nfunction copy(source, destination, maxDepth) {\n var stackSource = [];\n var stackDest = [];\n maxDepth = isValidObjectMaxDepth(maxDepth) ? maxDepth : NaN;\n\n if (destination) {\n if (isTypedArray(destination) || isArrayBuffer(destination)) {\n throw ngMinErr('cpta', 'Can\\'t copy! TypedArray destination cannot be mutated.');\n }\n if (source === destination) {\n throw ngMinErr('cpi', 'Can\\'t copy! Source and destination are identical.');\n }\n\n // Empty the destination object\n if (isArray(destination)) {\n destination.length = 0;\n } else {\n forEach(destination, function(value, key) {\n if (key !== '$$hashKey') {\n delete destination[key];\n }\n });\n }\n\n stackSource.push(source);\n stackDest.push(destination);\n return copyRecurse(source, destination, maxDepth);\n }\n\n return copyElement(source, maxDepth);\n\n function copyRecurse(source, destination, maxDepth) {\n maxDepth--;\n if (maxDepth < 0) {\n return '...';\n }\n var h = destination.$$hashKey;\n var key;\n if (isArray(source)) {\n for (var i = 0, ii = source.length; i < ii; i++) {\n destination.push(copyElement(source[i], maxDepth));\n }\n } else if (isBlankObject(source)) {\n // createMap() fast path --- Safe to avoid hasOwnProperty check because prototype chain is empty\n for (key in source) {\n destination[key] = copyElement(source[key], maxDepth);\n }\n } else if (source && typeof source.hasOwnProperty === 'function') {\n // Slow path, which must rely on hasOwnProperty\n for (key in source) {\n if (source.hasOwnProperty(key)) {\n destination[key] = copyElement(source[key], maxDepth);\n }\n }\n } else {\n // Slowest path --- hasOwnProperty can't be called as a method\n for (key in source) {\n if (hasOwnProperty.call(source, key)) {\n destination[key] = copyElement(source[key], maxDepth);\n }\n }\n }\n setHashKey(destination, h);\n return destination;\n }\n\n function copyElement(source, maxDepth) {\n // Simple values\n if (!isObject(source)) {\n return source;\n }\n\n // Already copied values\n var index = stackSource.indexOf(source);\n if (index !== -1) {\n return stackDest[index];\n }\n\n if (isWindow(source) || isScope(source)) {\n throw ngMinErr('cpws',\n 'Can\\'t copy! Making copies of Window or Scope instances is not supported.');\n }\n\n var needsRecurse = false;\n var destination = copyType(source);\n\n if (destination === undefined) {\n destination = isArray(source) ? [] : Object.create(getPrototypeOf(source));\n needsRecurse = true;\n }\n\n stackSource.push(source);\n stackDest.push(destination);\n\n return needsRecurse\n ? copyRecurse(source, destination, maxDepth)\n : destination;\n }\n\n function copyType(source) {\n switch (toString.call(source)) {\n case '[object Int8Array]':\n case '[object Int16Array]':\n case '[object Int32Array]':\n case '[object Float32Array]':\n case '[object Float64Array]':\n case '[object Uint8Array]':\n case '[object Uint8ClampedArray]':\n case '[object Uint16Array]':\n case '[object Uint32Array]':\n return new source.constructor(copyElement(source.buffer), source.byteOffset, source.length);\n\n case '[object ArrayBuffer]':\n // Support: IE10\n if (!source.slice) {\n // If we're in this case we know the environment supports ArrayBuffer\n /* eslint-disable no-undef */\n var copied = new ArrayBuffer(source.byteLength);\n new Uint8Array(copied).set(new Uint8Array(source));\n /* eslint-enable */\n return copied;\n }\n return source.slice(0);\n\n case '[object Boolean]':\n case '[object Number]':\n case '[object String]':\n case '[object Date]':\n return new source.constructor(source.valueOf());\n\n case '[object RegExp]':\n var re = new RegExp(source.source, source.toString().match(/[^/]*$/)[0]);\n re.lastIndex = source.lastIndex;\n return re;\n\n case '[object Blob]':\n return new source.constructor([source], {type: source.type});\n }\n\n if (isFunction(source.cloneNode)) {\n return source.cloneNode(true);\n }\n }\n}\n\n\n// eslint-disable-next-line no-self-compare\nfunction simpleCompare(a, b) { return a === b || (a !== a && b !== b); }\n\n\n/**\n * @ngdoc function\n * @name angular.equals\n * @module ng\n * @kind function\n *\n * @description\n * Determines if two objects or two values are equivalent. Supports value types, regular\n * expressions, arrays and objects.\n *\n * Two objects or values are considered equivalent if at least one of the following is true:\n *\n * * Both objects or values pass `===` comparison.\n * * Both objects or values are of the same type and all of their properties are equal by\n * comparing them with `angular.equals`.\n * * Both values are NaN. (In JavaScript, NaN == NaN => false. But we consider two NaN as equal)\n * * Both values represent the same regular expression (In JavaScript,\n * /abc/ == /abc/ => false. But we consider two regular expressions as equal when their textual\n * representation matches).\n *\n * During a property comparison, properties of `function` type and properties with names\n * that begin with `$` are ignored.\n *\n * Scope and DOMWindow objects are being compared only by identify (`===`).\n *\n * @param {*} o1 Object or value to compare.\n * @param {*} o2 Object or value to compare.\n * @returns {boolean} True if arguments are equal.\n *\n * @example\n \n \n \n \n angular.module('equalsExample', []).controller('ExampleController', ['$scope', function($scope) {\n $scope.user1 = {};\n $scope.user2 = {};\n $scope.compare = function() {\n $scope.result = angular.equals($scope.user1, $scope.user2);\n };\n }]);\n \n \n */\nfunction equals(o1, o2) {\n if (o1 === o2) return true;\n if (o1 === null || o2 === null) return false;\n // eslint-disable-next-line no-self-compare\n if (o1 !== o1 && o2 !== o2) return true; // NaN === NaN\n var t1 = typeof o1, t2 = typeof o2, length, key, keySet;\n if (t1 === t2 && t1 === 'object') {\n if (isArray(o1)) {\n if (!isArray(o2)) return false;\n if ((length = o1.length) === o2.length) {\n for (key = 0; key < length; key++) {\n if (!equals(o1[key], o2[key])) return false;\n }\n return true;\n }\n } else if (isDate(o1)) {\n if (!isDate(o2)) return false;\n return simpleCompare(o1.getTime(), o2.getTime());\n } else if (isRegExp(o1)) {\n if (!isRegExp(o2)) return false;\n return o1.toString() === o2.toString();\n } else {\n if (isScope(o1) || isScope(o2) || isWindow(o1) || isWindow(o2) ||\n isArray(o2) || isDate(o2) || isRegExp(o2)) return false;\n keySet = createMap();\n for (key in o1) {\n if (key.charAt(0) === '$' || isFunction(o1[key])) continue;\n if (!equals(o1[key], o2[key])) return false;\n keySet[key] = true;\n }\n for (key in o2) {\n if (!(key in keySet) &&\n key.charAt(0) !== '$' &&\n isDefined(o2[key]) &&\n !isFunction(o2[key])) return false;\n }\n return true;\n }\n }\n return false;\n}\n\nvar csp = function() {\n if (!isDefined(csp.rules)) {\n\n\n var ngCspElement = (window.document.querySelector('[ng-csp]') ||\n window.document.querySelector('[data-ng-csp]'));\n\n if (ngCspElement) {\n var ngCspAttribute = ngCspElement.getAttribute('ng-csp') ||\n ngCspElement.getAttribute('data-ng-csp');\n csp.rules = {\n noUnsafeEval: !ngCspAttribute || (ngCspAttribute.indexOf('no-unsafe-eval') !== -1),\n noInlineStyle: !ngCspAttribute || (ngCspAttribute.indexOf('no-inline-style') !== -1)\n };\n } else {\n csp.rules = {\n noUnsafeEval: noUnsafeEval(),\n noInlineStyle: false\n };\n }\n }\n\n return csp.rules;\n\n function noUnsafeEval() {\n try {\n // eslint-disable-next-line no-new, no-new-func\n new Function('');\n return false;\n } catch (e) {\n return true;\n }\n }\n};\n\n/**\n * @ngdoc directive\n * @module ng\n * @name ngJq\n *\n * @element ANY\n * @param {string=} ngJq the name of the library available under `window`\n * to be used for angular.element\n * @description\n * Use this directive to force the angular.element library. This should be\n * used to force either jqLite by leaving ng-jq blank or setting the name of\n * the jquery variable under window (eg. jQuery).\n *\n * Since AngularJS looks for this directive when it is loaded (doesn't wait for the\n * DOMContentLoaded event), it must be placed on an element that comes before the script\n * which loads angular. Also, only the first instance of `ng-jq` will be used and all\n * others ignored.\n *\n * @example\n * This example shows how to force jqLite using the `ngJq` directive to the `html` tag.\n ```html\n \n \n ...\n ...\n \n ```\n * @example\n * This example shows how to use a jQuery based library of a different name.\n * The library name must be available at the top most 'window'.\n ```html\n \n \n ...\n ...\n \n ```\n */\nvar jq = function() {\n if (isDefined(jq.name_)) return jq.name_;\n var el;\n var i, ii = ngAttrPrefixes.length, prefix, name;\n for (i = 0; i < ii; ++i) {\n prefix = ngAttrPrefixes[i];\n el = window.document.querySelector('[' + prefix.replace(':', '\\\\:') + 'jq]');\n if (el) {\n name = el.getAttribute(prefix + 'jq');\n break;\n }\n }\n\n return (jq.name_ = name);\n};\n\nfunction concat(array1, array2, index) {\n return array1.concat(slice.call(array2, index));\n}\n\nfunction sliceArgs(args, startIndex) {\n return slice.call(args, startIndex || 0);\n}\n\n\n/**\n * @ngdoc function\n * @name angular.bind\n * @module ng\n * @kind function\n *\n * @description\n * Returns a function which calls function `fn` bound to `self` (`self` becomes the `this` for\n * `fn`). You can supply optional `args` that are prebound to the function. This feature is also\n * known as [partial application](http://en.wikipedia.org/wiki/Partial_application), as\n * distinguished from [function currying](http://en.wikipedia.org/wiki/Currying#Contrast_with_partial_function_application).\n *\n * @param {Object} self Context which `fn` should be evaluated in.\n * @param {function()} fn Function to be bound.\n * @param {...*} args Optional arguments to be prebound to the `fn` function call.\n * @returns {function()} Function that wraps the `fn` with all the specified bindings.\n */\nfunction bind(self, fn) {\n var curryArgs = arguments.length > 2 ? sliceArgs(arguments, 2) : [];\n if (isFunction(fn) && !(fn instanceof RegExp)) {\n return curryArgs.length\n ? function() {\n return arguments.length\n ? fn.apply(self, concat(curryArgs, arguments, 0))\n : fn.apply(self, curryArgs);\n }\n : function() {\n return arguments.length\n ? fn.apply(self, arguments)\n : fn.call(self);\n };\n } else {\n // In IE, native methods are not functions so they cannot be bound (note: they don't need to be).\n return fn;\n }\n}\n\n\nfunction toJsonReplacer(key, value) {\n var val = value;\n\n if (typeof key === 'string' && key.charAt(0) === '$' && key.charAt(1) === '$') {\n val = undefined;\n } else if (isWindow(value)) {\n val = '$WINDOW';\n } else if (value && window.document === value) {\n val = '$DOCUMENT';\n } else if (isScope(value)) {\n val = '$SCOPE';\n }\n\n return val;\n}\n\n\n/**\n * @ngdoc function\n * @name angular.toJson\n * @module ng\n * @kind function\n *\n * @description\n * Serializes input into a JSON-formatted string. Properties with leading $$ characters will be\n * stripped since AngularJS uses this notation internally.\n *\n * @param {Object|Array|Date|string|number|boolean} obj Input to be serialized into JSON.\n * @param {boolean|number} [pretty=2] If set to true, the JSON output will contain newlines and whitespace.\n * If set to an integer, the JSON output will contain that many spaces per indentation.\n * @returns {string|undefined} JSON-ified string representing `obj`.\n * @knownIssue\n *\n * The Safari browser throws a `RangeError` instead of returning `null` when it tries to stringify a `Date`\n * object with an invalid date value. The only reliable way to prevent this is to monkeypatch the\n * `Date.prototype.toJSON` method as follows:\n *\n * ```\n * var _DatetoJSON = Date.prototype.toJSON;\n * Date.prototype.toJSON = function() {\n * try {\n * return _DatetoJSON.call(this);\n * } catch(e) {\n * if (e instanceof RangeError) {\n * return null;\n * }\n * throw e;\n * }\n * };\n * ```\n *\n * See https://github.com/angular/angular.js/pull/14221 for more information.\n */\nfunction toJson(obj, pretty) {\n if (isUndefined(obj)) return undefined;\n if (!isNumber(pretty)) {\n pretty = pretty ? 2 : null;\n }\n return JSON.stringify(obj, toJsonReplacer, pretty);\n}\n\n\n/**\n * @ngdoc function\n * @name angular.fromJson\n * @module ng\n * @kind function\n *\n * @description\n * Deserializes a JSON string.\n *\n * @param {string} json JSON string to deserialize.\n * @returns {Object|Array|string|number} Deserialized JSON string.\n */\nfunction fromJson(json) {\n return isString(json)\n ? JSON.parse(json)\n : json;\n}\n\n\nvar ALL_COLONS = /:/g;\nfunction timezoneToOffset(timezone, fallback) {\n // Support: IE 9-11 only, Edge 13-15+\n // IE/Edge do not \"understand\" colon (`:`) in timezone\n timezone = timezone.replace(ALL_COLONS, '');\n var requestedTimezoneOffset = Date.parse('Jan 01, 1970 00:00:00 ' + timezone) / 60000;\n return isNumberNaN(requestedTimezoneOffset) ? fallback : requestedTimezoneOffset;\n}\n\n\nfunction addDateMinutes(date, minutes) {\n date = new Date(date.getTime());\n date.setMinutes(date.getMinutes() + minutes);\n return date;\n}\n\n\nfunction convertTimezoneToLocal(date, timezone, reverse) {\n reverse = reverse ? -1 : 1;\n var dateTimezoneOffset = date.getTimezoneOffset();\n var timezoneOffset = timezoneToOffset(timezone, dateTimezoneOffset);\n return addDateMinutes(date, reverse * (timezoneOffset - dateTimezoneOffset));\n}\n\n\n/**\n * @returns {string} Returns the string representation of the element.\n */\nfunction startingTag(element) {\n element = jqLite(element).clone().empty();\n var elemHtml = jqLite('').append(element).html();\n try {\n return element[0].nodeType === NODE_TYPE_TEXT ? lowercase(elemHtml) :\n elemHtml.\n match(/^(<[^>]+>)/)[1].\n replace(/^<([\\w-]+)/, function(match, nodeName) {return '<' + lowercase(nodeName);});\n } catch (e) {\n return lowercase(elemHtml);\n }\n\n}\n\n\n/////////////////////////////////////////////////\n\n/**\n * Tries to decode the URI component without throwing an exception.\n *\n * @private\n * @param str value potential URI component to check.\n * @returns {boolean} True if `value` can be decoded\n * with the decodeURIComponent function.\n */\nfunction tryDecodeURIComponent(value) {\n try {\n return decodeURIComponent(value);\n } catch (e) {\n // Ignore any invalid uri component.\n }\n}\n\n\n/**\n * Parses an escaped url query string into key-value pairs.\n * @returns {Object.}\n */\nfunction parseKeyValue(/**string*/keyValue) {\n var obj = {};\n forEach((keyValue || '').split('&'), function(keyValue) {\n var splitPoint, key, val;\n if (keyValue) {\n key = keyValue = keyValue.replace(/\\+/g,'%20');\n splitPoint = keyValue.indexOf('=');\n if (splitPoint !== -1) {\n key = keyValue.substring(0, splitPoint);\n val = keyValue.substring(splitPoint + 1);\n }\n key = tryDecodeURIComponent(key);\n if (isDefined(key)) {\n val = isDefined(val) ? tryDecodeURIComponent(val) : true;\n if (!hasOwnProperty.call(obj, key)) {\n obj[key] = val;\n } else if (isArray(obj[key])) {\n obj[key].push(val);\n } else {\n obj[key] = [obj[key],val];\n }\n }\n }\n });\n return obj;\n}\n\nfunction toKeyValue(obj) {\n var parts = [];\n forEach(obj, function(value, key) {\n if (isArray(value)) {\n forEach(value, function(arrayValue) {\n parts.push(encodeUriQuery(key, true) +\n (arrayValue === true ? '' : '=' + encodeUriQuery(arrayValue, true)));\n });\n } else {\n parts.push(encodeUriQuery(key, true) +\n (value === true ? '' : '=' + encodeUriQuery(value, true)));\n }\n });\n return parts.length ? parts.join('&') : '';\n}\n\n\n/**\n * We need our custom method because encodeURIComponent is too aggressive and doesn't follow\n * http://www.ietf.org/rfc/rfc3986.txt with regards to the character set (pchar) allowed in path\n * segments:\n * segment = *pchar\n * pchar = unreserved / pct-encoded / sub-delims / \":\" / \"@\"\n * pct-encoded = \"%\" HEXDIG HEXDIG\n * unreserved = ALPHA / DIGIT / \"-\" / \".\" / \"_\" / \"~\"\n * sub-delims = \"!\" / \"$\" / \"&\" / \"'\" / \"(\" / \")\"\n * / \"*\" / \"+\" / \",\" / \";\" / \"=\"\n */\nfunction encodeUriSegment(val) {\n return encodeUriQuery(val, true).\n replace(/%26/gi, '&').\n replace(/%3D/gi, '=').\n replace(/%2B/gi, '+');\n}\n\n\n/**\n * This method is intended for encoding *key* or *value* parts of query component. We need a custom\n * method because encodeURIComponent is too aggressive and encodes stuff that doesn't have to be\n * encoded per http://tools.ietf.org/html/rfc3986:\n * query = *( pchar / \"/\" / \"?\" )\n * pchar = unreserved / pct-encoded / sub-delims / \":\" / \"@\"\n * unreserved = ALPHA / DIGIT / \"-\" / \".\" / \"_\" / \"~\"\n * pct-encoded = \"%\" HEXDIG HEXDIG\n * sub-delims = \"!\" / \"$\" / \"&\" / \"'\" / \"(\" / \")\"\n * / \"*\" / \"+\" / \",\" / \";\" / \"=\"\n */\nfunction encodeUriQuery(val, pctEncodeSpaces) {\n return encodeURIComponent(val).\n replace(/%40/gi, '@').\n replace(/%3A/gi, ':').\n replace(/%24/g, '$').\n replace(/%2C/gi, ',').\n replace(/%3B/gi, ';').\n replace(/%20/g, (pctEncodeSpaces ? '%20' : '+'));\n}\n\nvar ngAttrPrefixes = ['ng-', 'data-ng-', 'ng:', 'x-ng-'];\n\nfunction getNgAttribute(element, ngAttr) {\n var attr, i, ii = ngAttrPrefixes.length;\n for (i = 0; i < ii; ++i) {\n attr = ngAttrPrefixes[i] + ngAttr;\n if (isString(attr = element.getAttribute(attr))) {\n return attr;\n }\n }\n return null;\n}\n\nfunction allowAutoBootstrap(document) {\n var script = document.currentScript;\n\n if (!script) {\n // Support: IE 9-11 only\n // IE does not have `document.currentScript`\n return true;\n }\n\n // If the `currentScript` property has been clobbered just return false, since this indicates a probable attack\n if (!(script instanceof window.HTMLScriptElement || script instanceof window.SVGScriptElement)) {\n return false;\n }\n\n var attributes = script.attributes;\n var srcs = [attributes.getNamedItem('src'), attributes.getNamedItem('href'), attributes.getNamedItem('xlink:href')];\n\n return srcs.every(function(src) {\n if (!src) {\n return true;\n }\n if (!src.value) {\n return false;\n }\n\n var link = document.createElement('a');\n link.href = src.value;\n\n if (document.location.origin === link.origin) {\n // Same-origin resources are always allowed, even for banned URL schemes.\n return true;\n }\n // Disabled bootstrapping unless angular.js was loaded from a known scheme used on the web.\n // This is to prevent angular.js bundled with browser extensions from being used to bypass the\n // content security policy in web pages and other browser extensions.\n switch (link.protocol) {\n case 'http:':\n case 'https:':\n case 'ftp:':\n case 'blob:':\n case 'file:':\n case 'data:':\n return true;\n default:\n return false;\n }\n });\n}\n\n// Cached as it has to run during loading so that document.currentScript is available.\nvar isAutoBootstrapAllowed = allowAutoBootstrap(window.document);\n\n/**\n * @ngdoc directive\n * @name ngApp\n * @module ng\n *\n * @element ANY\n * @param {angular.Module} ngApp an optional application\n * {@link angular.module module} name to load.\n * @param {boolean=} ngStrictDi if this attribute is present on the app element, the injector will be\n * created in \"strict-di\" mode. This means that the application will fail to invoke functions which\n * do not use explicit function annotation (and are thus unsuitable for minification), as described\n * in {@link guide/di the Dependency Injection guide}, and useful debugging info will assist in\n * tracking down the root of these bugs.\n *\n * @description\n *\n * Use this directive to **auto-bootstrap** an AngularJS application. The `ngApp` directive\n * designates the **root element** of the application and is typically placed near the root element\n * of the page - e.g. on the `` or `` tags.\n *\n * There are a few things to keep in mind when using `ngApp`:\n * - only one AngularJS application can be auto-bootstrapped per HTML document. The first `ngApp`\n * found in the document will be used to define the root element to auto-bootstrap as an\n * application. To run multiple applications in an HTML document you must manually bootstrap them using\n * {@link angular.bootstrap} instead.\n * - AngularJS applications cannot be nested within each other.\n * - Do not use a directive that uses {@link ng.$compile#transclusion transclusion} on the same element as `ngApp`.\n * This includes directives such as {@link ng.ngIf `ngIf`}, {@link ng.ngInclude `ngInclude`} and\n * {@link ngRoute.ngView `ngView`}.\n * Doing this misplaces the app {@link ng.$rootElement `$rootElement`} and the app's {@link auto.$injector injector},\n * causing animations to stop working and making the injector inaccessible from outside the app.\n *\n * You can specify an **AngularJS module** to be used as the root module for the application. This\n * module will be loaded into the {@link auto.$injector} when the application is bootstrapped. It\n * should contain the application code needed or have dependencies on other modules that will\n * contain the code. See {@link angular.module} for more information.\n *\n * In the example below if the `ngApp` directive were not placed on the `html` element then the\n * document would not be compiled, the `AppController` would not be instantiated and the `{{ a+b }}`\n * would not be resolved to `3`.\n *\n * @example\n *\n * ### Simple Usage\n *\n * `ngApp` is the easiest, and most common way to bootstrap an application.\n *\n \n \n \n \n angular.module('ngAppDemo', []).controller('ngAppDemoController', function($scope) {\n $scope.a = 1;\n $scope.b = 2;\n });\n \n \n *\n * @example\n *\n * ### With `ngStrictDi`\n *\n * Using `ngStrictDi`, you would see something like this:\n *\n \n \n \n \n angular.module('ngAppStrictDemo', [])\n // BadController will fail to instantiate, due to relying on automatic function annotation,\n // rather than an explicit annotation\n .controller('BadController', function($scope) {\n $scope.a = 1;\n $scope.b = 2;\n })\n // Unlike BadController, GoodController1 and GoodController2 will not fail to be instantiated,\n // due to using explicit annotations using the array style and $inject property, respectively.\n .controller('GoodController1', ['$scope', function($scope) {\n $scope.a = 1;\n $scope.b = 2;\n }])\n .controller('GoodController2', GoodController2);\n function GoodController2($scope) {\n $scope.name = 'World';\n }\n GoodController2.$inject = ['$scope'];\n \n \n div[ng-controller] {\n margin-bottom: 1em;\n -webkit-border-radius: 4px;\n border-radius: 4px;\n border: 1px solid;\n padding: .5em;\n }\n div[ng-controller^=Good] {\n border-color: #d6e9c6;\n background-color: #dff0d8;\n color: #3c763d;\n }\n div[ng-controller^=Bad] {\n border-color: #ebccd1;\n background-color: #f2dede;\n color: #a94442;\n margin-bottom: 0;\n }\n \n \n */\nfunction angularInit(element, bootstrap) {\n var appElement,\n module,\n config = {};\n\n // The element `element` has priority over any other element.\n forEach(ngAttrPrefixes, function(prefix) {\n var name = prefix + 'app';\n\n if (!appElement && element.hasAttribute && element.hasAttribute(name)) {\n appElement = element;\n module = element.getAttribute(name);\n }\n });\n forEach(ngAttrPrefixes, function(prefix) {\n var name = prefix + 'app';\n var candidate;\n\n if (!appElement && (candidate = element.querySelector('[' + name.replace(':', '\\\\:') + ']'))) {\n appElement = candidate;\n module = candidate.getAttribute(name);\n }\n });\n if (appElement) {\n if (!isAutoBootstrapAllowed) {\n window.console.error('AngularJS: disabling automatic bootstrap. \n * \n * \n * \n * ```\n *\n * @param {DOMElement} element DOM element which is the root of AngularJS application.\n * @param {Array=} modules an array of modules to load into the application.\n * Each item in the array should be the name of a predefined module or a (DI annotated)\n * function that will be invoked by the injector as a `config` block.\n * See: {@link angular.module modules}\n * @param {Object=} config an object for defining configuration options for the application. The\n * following keys are supported:\n *\n * * `strictDi` - disable automatic function annotation for the application. This is meant to\n * assist in finding bugs which break minified code. Defaults to `false`.\n *\n * @returns {auto.$injector} Returns the newly created injector for this app.\n */\nfunction bootstrap(element, modules, config) {\n if (!isObject(config)) config = {};\n var defaultConfig = {\n strictDi: false\n };\n config = extend(defaultConfig, config);\n var doBootstrap = function() {\n element = jqLite(element);\n\n if (element.injector()) {\n var tag = (element[0] === window.document) ? 'document' : startingTag(element);\n // Encode angle brackets to prevent input from being sanitized to empty string #8683.\n throw ngMinErr(\n 'btstrpd',\n 'App already bootstrapped with this element \\'{0}\\'',\n tag.replace(//,'>'));\n }\n\n modules = modules || [];\n modules.unshift(['$provide', function($provide) {\n $provide.value('$rootElement', element);\n }]);\n\n if (config.debugInfoEnabled) {\n // Pushing so that this overrides `debugInfoEnabled` setting defined in user's `modules`.\n modules.push(['$compileProvider', function($compileProvider) {\n $compileProvider.debugInfoEnabled(true);\n }]);\n }\n\n modules.unshift('ng');\n var injector = createInjector(modules, config.strictDi);\n injector.invoke(['$rootScope', '$rootElement', '$compile', '$injector',\n function bootstrapApply(scope, element, compile, injector) {\n scope.$apply(function() {\n element.data('$injector', injector);\n compile(element)(scope);\n });\n }]\n );\n return injector;\n };\n\n var NG_ENABLE_DEBUG_INFO = /^NG_ENABLE_DEBUG_INFO!/;\n var NG_DEFER_BOOTSTRAP = /^NG_DEFER_BOOTSTRAP!/;\n\n if (window && NG_ENABLE_DEBUG_INFO.test(window.name)) {\n config.debugInfoEnabled = true;\n window.name = window.name.replace(NG_ENABLE_DEBUG_INFO, '');\n }\n\n if (window && !NG_DEFER_BOOTSTRAP.test(window.name)) {\n return doBootstrap();\n }\n\n window.name = window.name.replace(NG_DEFER_BOOTSTRAP, '');\n angular.resumeBootstrap = function(extraModules) {\n forEach(extraModules, function(module) {\n modules.push(module);\n });\n return doBootstrap();\n };\n\n if (isFunction(angular.resumeDeferredBootstrap)) {\n angular.resumeDeferredBootstrap();\n }\n}\n\n/**\n * @ngdoc function\n * @name angular.reloadWithDebugInfo\n * @module ng\n * @description\n * Use this function to reload the current application with debug information turned on.\n * This takes precedence over a call to `$compileProvider.debugInfoEnabled(false)`.\n *\n * See {@link ng.$compileProvider#debugInfoEnabled} for more.\n */\nfunction reloadWithDebugInfo() {\n window.name = 'NG_ENABLE_DEBUG_INFO!' + window.name;\n window.location.reload();\n}\n\n/**\n * @name angular.getTestability\n * @module ng\n * @description\n * Get the testability service for the instance of AngularJS on the given\n * element.\n * @param {DOMElement} element DOM element which is the root of AngularJS application.\n */\nfunction getTestability(rootElement) {\n var injector = angular.element(rootElement).injector();\n if (!injector) {\n throw ngMinErr('test',\n 'no injector found for element argument to getTestability');\n }\n return injector.get('$$testability');\n}\n\nvar SNAKE_CASE_REGEXP = /[A-Z]/g;\nfunction snake_case(name, separator) {\n separator = separator || '_';\n return name.replace(SNAKE_CASE_REGEXP, function(letter, pos) {\n return (pos ? separator : '') + letter.toLowerCase();\n });\n}\n\nvar bindJQueryFired = false;\nfunction bindJQuery() {\n var originalCleanData;\n\n if (bindJQueryFired) {\n return;\n }\n\n // bind to jQuery if present;\n var jqName = jq();\n jQuery = isUndefined(jqName) ? window.jQuery : // use jQuery (if present)\n !jqName ? undefined : // use jqLite\n window[jqName]; // use jQuery specified by `ngJq`\n\n // Use jQuery if it exists with proper functionality, otherwise default to us.\n // AngularJS 1.2+ requires jQuery 1.7+ for on()/off() support.\n // AngularJS 1.3+ technically requires at least jQuery 2.1+ but it may work with older\n // versions. It will not work for sure with jQuery <1.7, though.\n if (jQuery && jQuery.fn.on) {\n jqLite = jQuery;\n extend(jQuery.fn, {\n scope: JQLitePrototype.scope,\n isolateScope: JQLitePrototype.isolateScope,\n controller: /** @type {?} */ (JQLitePrototype).controller,\n injector: JQLitePrototype.injector,\n inheritedData: JQLitePrototype.inheritedData\n });\n } else {\n jqLite = JQLite;\n }\n\n // All nodes removed from the DOM via various jqLite/jQuery APIs like .remove()\n // are passed through jqLite/jQuery.cleanData. Monkey-patch this method to fire\n // the $destroy event on all removed nodes.\n originalCleanData = jqLite.cleanData;\n jqLite.cleanData = function(elems) {\n var events;\n for (var i = 0, elem; (elem = elems[i]) != null; i++) {\n events = (jqLite._data(elem) || {}).events;\n if (events && events.$destroy) {\n jqLite(elem).triggerHandler('$destroy');\n }\n }\n originalCleanData(elems);\n };\n\n angular.element = jqLite;\n\n // Prevent double-proxying.\n bindJQueryFired = true;\n}\n\n/**\n * @ngdoc function\n * @name angular.UNSAFE_restoreLegacyJqLiteXHTMLReplacement\n * @module ng\n * @kind function\n *\n * @description\n * Restores the pre-1.8 behavior of jqLite that turns XHTML-like strings like\n * `` to `` instead of `} */\n var modules = {};\n\n /**\n * @ngdoc function\n * @name angular.module\n * @module ng\n * @description\n *\n * The `angular.module` is a global place for creating, registering and retrieving AngularJS\n * modules.\n * All modules (AngularJS core or 3rd party) that should be available to an application must be\n * registered using this mechanism.\n *\n * Passing one argument retrieves an existing {@link angular.Module},\n * whereas passing more than one argument creates a new {@link angular.Module}\n *\n *\n * # Module\n *\n * A module is a collection of services, directives, controllers, filters, and configuration information.\n * `angular.module` is used to configure the {@link auto.$injector $injector}.\n *\n * ```js\n * // Create a new module\n * var myModule = angular.module('myModule', []);\n *\n * // register a new service\n * myModule.value('appName', 'MyCoolApp');\n *\n * // configure existing services inside initialization blocks.\n * myModule.config(['$locationProvider', function($locationProvider) {\n * // Configure existing providers\n * $locationProvider.hashPrefix('!');\n * }]);\n * ```\n *\n * Then you can create an injector and load your modules like this:\n *\n * ```js\n * var injector = angular.injector(['ng', 'myModule'])\n * ```\n *\n * However it's more likely that you'll just use\n * {@link ng.directive:ngApp ngApp} or\n * {@link angular.bootstrap} to simplify this process for you.\n *\n * @param {!string} name The name of the module to create or retrieve.\n * @param {!Array.=} requires If specified then new module is being created. If\n * unspecified then the module is being retrieved for further configuration.\n * @param {Function=} configFn Optional configuration function for the module. Same as\n * {@link angular.Module#config Module#config()}.\n * @returns {angular.Module} new module with the {@link angular.Module} api.\n */\n return function module(name, requires, configFn) {\n\n var info = {};\n\n var assertNotHasOwnProperty = function(name, context) {\n if (name === 'hasOwnProperty') {\n throw ngMinErr('badname', 'hasOwnProperty is not a valid {0} name', context);\n }\n };\n\n assertNotHasOwnProperty(name, 'module');\n if (requires && modules.hasOwnProperty(name)) {\n modules[name] = null;\n }\n return ensure(modules, name, function() {\n if (!requires) {\n throw $injectorMinErr('nomod', 'Module \\'{0}\\' is not available! You either misspelled ' +\n 'the module name or forgot to load it. If registering a module ensure that you ' +\n 'specify the dependencies as the second argument.', name);\n }\n\n /** @type {!Array.>} */\n var invokeQueue = [];\n\n /** @type {!Array.} */\n var configBlocks = [];\n\n /** @type {!Array.} */\n var runBlocks = [];\n\n var config = invokeLater('$injector', 'invoke', 'push', configBlocks);\n\n /** @type {angular.Module} */\n var moduleInstance = {\n // Private state\n _invokeQueue: invokeQueue,\n _configBlocks: configBlocks,\n _runBlocks: runBlocks,\n\n /**\n * @ngdoc method\n * @name angular.Module#info\n * @module ng\n *\n * @param {Object=} info Information about the module\n * @returns {Object|Module} The current info object for this module if called as a getter,\n * or `this` if called as a setter.\n *\n * @description\n * Read and write custom information about this module.\n * For example you could put the version of the module in here.\n *\n * ```js\n * angular.module('myModule', []).info({ version: '1.0.0' });\n * ```\n *\n * The version could then be read back out by accessing the module elsewhere:\n *\n * ```\n * var version = angular.module('myModule').info().version;\n * ```\n *\n * You can also retrieve this information during runtime via the\n * {@link $injector#modules `$injector.modules`} property:\n *\n * ```js\n * var version = $injector.modules['myModule'].info().version;\n * ```\n */\n info: function(value) {\n if (isDefined(value)) {\n if (!isObject(value)) throw ngMinErr('aobj', 'Argument \\'{0}\\' must be an object', 'value');\n info = value;\n return this;\n }\n return info;\n },\n\n /**\n * @ngdoc property\n * @name angular.Module#requires\n * @module ng\n *\n * @description\n * Holds the list of modules which the injector will load before the current module is\n * loaded.\n */\n requires: requires,\n\n /**\n * @ngdoc property\n * @name angular.Module#name\n * @module ng\n *\n * @description\n * Name of the module.\n */\n name: name,\n\n\n /**\n * @ngdoc method\n * @name angular.Module#provider\n * @module ng\n * @param {string} name service name\n * @param {Function} providerType Construction function for creating new instance of the\n * service.\n * @description\n * See {@link auto.$provide#provider $provide.provider()}.\n */\n provider: invokeLaterAndSetModuleName('$provide', 'provider'),\n\n /**\n * @ngdoc method\n * @name angular.Module#factory\n * @module ng\n * @param {string} name service name\n * @param {Function} providerFunction Function for creating new instance of the service.\n * @description\n * See {@link auto.$provide#factory $provide.factory()}.\n */\n factory: invokeLaterAndSetModuleName('$provide', 'factory'),\n\n /**\n * @ngdoc method\n * @name angular.Module#service\n * @module ng\n * @param {string} name service name\n * @param {Function} constructor A constructor function that will be instantiated.\n * @description\n * See {@link auto.$provide#service $provide.service()}.\n */\n service: invokeLaterAndSetModuleName('$provide', 'service'),\n\n /**\n * @ngdoc method\n * @name angular.Module#value\n * @module ng\n * @param {string} name service name\n * @param {*} object Service instance object.\n * @description\n * See {@link auto.$provide#value $provide.value()}.\n */\n value: invokeLater('$provide', 'value'),\n\n /**\n * @ngdoc method\n * @name angular.Module#constant\n * @module ng\n * @param {string} name constant name\n * @param {*} object Constant value.\n * @description\n * Because the constants are fixed, they get applied before other provide methods.\n * See {@link auto.$provide#constant $provide.constant()}.\n */\n constant: invokeLater('$provide', 'constant', 'unshift'),\n\n /**\n * @ngdoc method\n * @name angular.Module#decorator\n * @module ng\n * @param {string} name The name of the service to decorate.\n * @param {Function} decorFn This function will be invoked when the service needs to be\n * instantiated and should return the decorated service instance.\n * @description\n * See {@link auto.$provide#decorator $provide.decorator()}.\n */\n decorator: invokeLaterAndSetModuleName('$provide', 'decorator', configBlocks),\n\n /**\n * @ngdoc method\n * @name angular.Module#animation\n * @module ng\n * @param {string} name animation name\n * @param {Function} animationFactory Factory function for creating new instance of an\n * animation.\n * @description\n *\n * **NOTE**: animations take effect only if the **ngAnimate** module is loaded.\n *\n *\n * Defines an animation hook that can be later used with\n * {@link $animate $animate} service and directives that use this service.\n *\n * ```js\n * module.animation('.animation-name', function($inject1, $inject2) {\n * return {\n * eventName : function(element, done) {\n * //code to run the animation\n * //once complete, then run done()\n * return function cancellationFunction(element) {\n * //code to cancel the animation\n * }\n * }\n * }\n * })\n * ```\n *\n * See {@link ng.$animateProvider#register $animateProvider.register()} and\n * {@link ngAnimate ngAnimate module} for more information.\n */\n animation: invokeLaterAndSetModuleName('$animateProvider', 'register'),\n\n /**\n * @ngdoc method\n * @name angular.Module#filter\n * @module ng\n * @param {string} name Filter name - this must be a valid AngularJS expression identifier\n * @param {Function} filterFactory Factory function for creating new instance of filter.\n * @description\n * See {@link ng.$filterProvider#register $filterProvider.register()}.\n *\n * `),\n * or an object map of components where the keys are the names and the values are the component definition objects.\n * @param {Object} options Component definition object (a simplified\n * {@link ng.$compile#directive-definition-object directive definition object})\n *\n * @description\n * See {@link ng.$compileProvider#component $compileProvider.component()}.\n */\n component: invokeLaterAndSetModuleName('$compileProvider', 'component'),\n\n /**\n * @ngdoc method\n * @name angular.Module#config\n * @module ng\n * @param {Function} configFn Execute this function on module load. Useful for service\n * configuration.\n * @description\n * Use this method to configure services by injecting their\n * {@link angular.Module#provider `providers`}, e.g. for adding routes to the\n * {@link ngRoute.$routeProvider $routeProvider}.\n *\n * Note that you can only inject {@link angular.Module#provider `providers`} and\n * {@link angular.Module#constant `constants`} into this function.\n *\n * For more about how to configure services, see\n * {@link providers#provider-recipe Provider Recipe}.\n */\n config: config,\n\n /**\n * @ngdoc method\n * @name angular.Module#run\n * @module ng\n * @param {Function} initializationFn Execute this function after injector creation.\n * Useful for application initialization.\n * @description\n * Use this method to register work which should be performed when the injector is done\n * loading all modules.\n */\n run: function(block) {\n runBlocks.push(block);\n return this;\n }\n };\n\n if (configFn) {\n config(configFn);\n }\n\n return moduleInstance;\n\n /**\n * @param {string} provider\n * @param {string} method\n * @param {String=} insertMethod\n * @returns {angular.Module}\n */\n function invokeLater(provider, method, insertMethod, queue) {\n if (!queue) queue = invokeQueue;\n return function() {\n queue[insertMethod || 'push']([provider, method, arguments]);\n return moduleInstance;\n };\n }\n\n /**\n * @param {string} provider\n * @param {string} method\n * @returns {angular.Module}\n */\n function invokeLaterAndSetModuleName(provider, method, queue) {\n if (!queue) queue = invokeQueue;\n return function(recipeName, factoryFunction) {\n if (factoryFunction && isFunction(factoryFunction)) factoryFunction.$$moduleName = name;\n queue.push([provider, method, arguments]);\n return moduleInstance;\n };\n }\n });\n };\n });\n\n}\n\n/* global shallowCopy: true */\n\n/**\n * Creates a shallow copy of an object, an array or a primitive.\n *\n * Assumes that there are no proto properties for objects.\n */\nfunction shallowCopy(src, dst) {\n if (isArray(src)) {\n dst = dst || [];\n\n for (var i = 0, ii = src.length; i < ii; i++) {\n dst[i] = src[i];\n }\n } else if (isObject(src)) {\n dst = dst || {};\n\n for (var key in src) {\n if (!(key.charAt(0) === '$' && key.charAt(1) === '$')) {\n dst[key] = src[key];\n }\n }\n }\n\n return dst || src;\n}\n\n/* exported toDebugString */\n\nfunction serializeObject(obj, maxDepth) {\n var seen = [];\n\n // There is no direct way to stringify object until reaching a specific depth\n // and a very deep object can cause a performance issue, so we copy the object\n // based on this specific depth and then stringify it.\n if (isValidObjectMaxDepth(maxDepth)) {\n // This file is also included in `angular-loader`, so `copy()` might not always be available in\n // the closure. Therefore, it is lazily retrieved as `angular.copy()` when needed.\n obj = angular.copy(obj, null, maxDepth);\n }\n return JSON.stringify(obj, function(key, val) {\n val = toJsonReplacer(key, val);\n if (isObject(val)) {\n\n if (seen.indexOf(val) >= 0) return '...';\n\n seen.push(val);\n }\n return val;\n });\n}\n\nfunction toDebugString(obj, maxDepth) {\n if (typeof obj === 'function') {\n return obj.toString().replace(/ \\{[\\s\\S]*$/, '');\n } else if (isUndefined(obj)) {\n return 'undefined';\n } else if (typeof obj !== 'string') {\n return serializeObject(obj, maxDepth);\n }\n return obj;\n}\n\n/* global angularModule: true,\n version: true,\n\n $CompileProvider,\n\n htmlAnchorDirective,\n inputDirective,\n hiddenInputBrowserCacheDirective,\n formDirective,\n scriptDirective,\n selectDirective,\n optionDirective,\n ngBindDirective,\n ngBindHtmlDirective,\n ngBindTemplateDirective,\n ngClassDirective,\n ngClassEvenDirective,\n ngClassOddDirective,\n ngCloakDirective,\n ngControllerDirective,\n ngFormDirective,\n ngHideDirective,\n ngIfDirective,\n ngIncludeDirective,\n ngIncludeFillContentDirective,\n ngInitDirective,\n ngNonBindableDirective,\n ngPluralizeDirective,\n ngRefDirective,\n ngRepeatDirective,\n ngShowDirective,\n ngStyleDirective,\n ngSwitchDirective,\n ngSwitchWhenDirective,\n ngSwitchDefaultDirective,\n ngOptionsDirective,\n ngTranscludeDirective,\n ngModelDirective,\n ngListDirective,\n ngChangeDirective,\n patternDirective,\n patternDirective,\n requiredDirective,\n requiredDirective,\n minlengthDirective,\n minlengthDirective,\n maxlengthDirective,\n maxlengthDirective,\n ngValueDirective,\n ngModelOptionsDirective,\n ngAttributeAliasDirectives,\n ngEventDirectives,\n\n $AnchorScrollProvider,\n $AnimateProvider,\n $CoreAnimateCssProvider,\n $$CoreAnimateJsProvider,\n $$CoreAnimateQueueProvider,\n $$AnimateRunnerFactoryProvider,\n $$AnimateAsyncRunFactoryProvider,\n $BrowserProvider,\n $CacheFactoryProvider,\n $ControllerProvider,\n $DateProvider,\n $DocumentProvider,\n $$IsDocumentHiddenProvider,\n $ExceptionHandlerProvider,\n $FilterProvider,\n $$ForceReflowProvider,\n $InterpolateProvider,\n $$IntervalFactoryProvider,\n $IntervalProvider,\n $HttpProvider,\n $HttpParamSerializerProvider,\n $HttpParamSerializerJQLikeProvider,\n $HttpBackendProvider,\n $xhrFactoryProvider,\n $jsonpCallbacksProvider,\n $LocationProvider,\n $LogProvider,\n $$MapProvider,\n $ParseProvider,\n $RootScopeProvider,\n $QProvider,\n $$QProvider,\n $$SanitizeUriProvider,\n $SceProvider,\n $SceDelegateProvider,\n $SnifferProvider,\n $$TaskTrackerFactoryProvider,\n $TemplateCacheProvider,\n $TemplateRequestProvider,\n $$TestabilityProvider,\n $TimeoutProvider,\n $$RAFProvider,\n $WindowProvider,\n $$jqLiteProvider,\n $$CookieReaderProvider\n*/\n\n\n/**\n * @ngdoc object\n * @name angular.version\n * @module ng\n * @description\n * An object that contains information about the current AngularJS version.\n *\n * This object has the following properties:\n *\n * - `full` – `{string}` – Full version string, such as \"0.9.18\".\n * - `major` – `{number}` – Major version number, such as \"0\".\n * - `minor` – `{number}` – Minor version number, such as \"9\".\n * - `dot` – `{number}` – Dot version number, such as \"18\".\n * - `codeName` – `{string}` – Code name of the release, such as \"jiggling-armfat\".\n */\nvar version = {\n // These placeholder strings will be replaced by grunt's `build` task.\n // They need to be double- or single-quoted.\n full: '1.8.3',\n major: 1,\n minor: 8,\n dot: 3,\n codeName: 'ultimate-farewell'\n};\n\n\nfunction publishExternalAPI(angular) {\n extend(angular, {\n 'errorHandlingConfig': errorHandlingConfig,\n 'bootstrap': bootstrap,\n 'copy': copy,\n 'extend': extend,\n 'merge': merge,\n 'equals': equals,\n 'element': jqLite,\n 'forEach': forEach,\n 'injector': createInjector,\n 'noop': noop,\n 'bind': bind,\n 'toJson': toJson,\n 'fromJson': fromJson,\n 'identity': identity,\n 'isUndefined': isUndefined,\n 'isDefined': isDefined,\n 'isString': isString,\n 'isFunction': isFunction,\n 'isObject': isObject,\n 'isNumber': isNumber,\n 'isElement': isElement,\n 'isArray': isArray,\n 'version': version,\n 'isDate': isDate,\n 'callbacks': {$$counter: 0},\n 'getTestability': getTestability,\n 'reloadWithDebugInfo': reloadWithDebugInfo,\n 'UNSAFE_restoreLegacyJqLiteXHTMLReplacement': UNSAFE_restoreLegacyJqLiteXHTMLReplacement,\n '$$minErr': minErr,\n '$$csp': csp,\n '$$encodeUriSegment': encodeUriSegment,\n '$$encodeUriQuery': encodeUriQuery,\n '$$lowercase': lowercase,\n '$$stringify': stringify,\n '$$uppercase': uppercase\n });\n\n angularModule = setupModuleLoader(window);\n\n angularModule('ng', ['ngLocale'], ['$provide',\n function ngModule($provide) {\n // $$sanitizeUriProvider needs to be before $compileProvider as it is used by it.\n $provide.provider({\n $$sanitizeUri: $$SanitizeUriProvider\n });\n $provide.provider('$compile', $CompileProvider).\n directive({\n a: htmlAnchorDirective,\n input: inputDirective,\n textarea: inputDirective,\n form: formDirective,\n script: scriptDirective,\n select: selectDirective,\n option: optionDirective,\n ngBind: ngBindDirective,\n ngBindHtml: ngBindHtmlDirective,\n ngBindTemplate: ngBindTemplateDirective,\n ngClass: ngClassDirective,\n ngClassEven: ngClassEvenDirective,\n ngClassOdd: ngClassOddDirective,\n ngCloak: ngCloakDirective,\n ngController: ngControllerDirective,\n ngForm: ngFormDirective,\n ngHide: ngHideDirective,\n ngIf: ngIfDirective,\n ngInclude: ngIncludeDirective,\n ngInit: ngInitDirective,\n ngNonBindable: ngNonBindableDirective,\n ngPluralize: ngPluralizeDirective,\n ngRef: ngRefDirective,\n ngRepeat: ngRepeatDirective,\n ngShow: ngShowDirective,\n ngStyle: ngStyleDirective,\n ngSwitch: ngSwitchDirective,\n ngSwitchWhen: ngSwitchWhenDirective,\n ngSwitchDefault: ngSwitchDefaultDirective,\n ngOptions: ngOptionsDirective,\n ngTransclude: ngTranscludeDirective,\n ngModel: ngModelDirective,\n ngList: ngListDirective,\n ngChange: ngChangeDirective,\n pattern: patternDirective,\n ngPattern: patternDirective,\n required: requiredDirective,\n ngRequired: requiredDirective,\n minlength: minlengthDirective,\n ngMinlength: minlengthDirective,\n maxlength: maxlengthDirective,\n ngMaxlength: maxlengthDirective,\n ngValue: ngValueDirective,\n ngModelOptions: ngModelOptionsDirective\n }).\n directive({\n ngInclude: ngIncludeFillContentDirective,\n input: hiddenInputBrowserCacheDirective\n }).\n directive(ngAttributeAliasDirectives).\n directive(ngEventDirectives);\n $provide.provider({\n $anchorScroll: $AnchorScrollProvider,\n $animate: $AnimateProvider,\n $animateCss: $CoreAnimateCssProvider,\n $$animateJs: $$CoreAnimateJsProvider,\n $$animateQueue: $$CoreAnimateQueueProvider,\n $$AnimateRunner: $$AnimateRunnerFactoryProvider,\n $$animateAsyncRun: $$AnimateAsyncRunFactoryProvider,\n $browser: $BrowserProvider,\n $cacheFactory: $CacheFactoryProvider,\n $controller: $ControllerProvider,\n $document: $DocumentProvider,\n $$isDocumentHidden: $$IsDocumentHiddenProvider,\n $exceptionHandler: $ExceptionHandlerProvider,\n $filter: $FilterProvider,\n $$forceReflow: $$ForceReflowProvider,\n $interpolate: $InterpolateProvider,\n $interval: $IntervalProvider,\n $$intervalFactory: $$IntervalFactoryProvider,\n $http: $HttpProvider,\n $httpParamSerializer: $HttpParamSerializerProvider,\n $httpParamSerializerJQLike: $HttpParamSerializerJQLikeProvider,\n $httpBackend: $HttpBackendProvider,\n $xhrFactory: $xhrFactoryProvider,\n $jsonpCallbacks: $jsonpCallbacksProvider,\n $location: $LocationProvider,\n $log: $LogProvider,\n $parse: $ParseProvider,\n $rootScope: $RootScopeProvider,\n $q: $QProvider,\n $$q: $$QProvider,\n $sce: $SceProvider,\n $sceDelegate: $SceDelegateProvider,\n $sniffer: $SnifferProvider,\n $$taskTrackerFactory: $$TaskTrackerFactoryProvider,\n $templateCache: $TemplateCacheProvider,\n $templateRequest: $TemplateRequestProvider,\n $$testability: $$TestabilityProvider,\n $timeout: $TimeoutProvider,\n $window: $WindowProvider,\n $$rAF: $$RAFProvider,\n $$jqLite: $$jqLiteProvider,\n $$Map: $$MapProvider,\n $$cookieReader: $$CookieReaderProvider\n });\n }\n ])\n .info({ angularVersion: '1.8.3' });\n}\n\n/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *\n * Any commits to this file should be reviewed with security in mind. *\n * Changes to this file can potentially create security vulnerabilities. *\n * An approval from 2 Core members with history of modifying *\n * this file is required. *\n * *\n * Does the change somehow allow for arbitrary javascript to be executed? *\n * Or allows for someone to change the prototype of built-in objects? *\n * Or gives undesired access to variables likes document or window? *\n * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */\n\n/* global\n JQLitePrototype: true,\n BOOLEAN_ATTR: true,\n ALIASED_ATTR: true\n*/\n\n//////////////////////////////////\n//JQLite\n//////////////////////////////////\n\n/**\n * @ngdoc function\n * @name angular.element\n * @module ng\n * @kind function\n *\n * @description\n * Wraps a raw DOM element or HTML string as a [jQuery](http://jquery.com) element.\n *\n * If jQuery is available, `angular.element` is an alias for the\n * [jQuery](http://api.jquery.com/jQuery/) function. If jQuery is not available, `angular.element`\n * delegates to AngularJS's built-in subset of jQuery, called \"jQuery lite\" or **jqLite**.\n *\n * jqLite is a tiny, API-compatible subset of jQuery that allows\n * AngularJS to manipulate the DOM in a cross-browser compatible way. jqLite implements only the most\n * commonly needed functionality with the goal of having a very small footprint.\n *\n * To use `jQuery`, simply ensure it is loaded before the `angular.js` file. You can also use the\n * {@link ngJq `ngJq`} directive to specify that jqlite should be used over jQuery, or to use a\n * specific version of jQuery if multiple versions exist on the page.\n *\n * ` or they're\n// stripped to their contents when put in a div.\n// XHTML parsers do not magically insert elements in the\n// same way that tag soup parsers do, so we cannot shorten\n// this by omitting or other required elements.\nvar wrapMap = {\n thead: ['table'],\n col: ['colgroup', 'table'],\n tr: ['tbody', 'table'],\n td: ['tr', 'tbody', 'table']\n};\n\nwrapMap.tbody = wrapMap.tfoot = wrapMap.colgroup = wrapMap.caption = wrapMap.thead;\nwrapMap.th = wrapMap.td;\n\n// Support: IE <10 only\n// IE 9 requires an option wrapper & it needs to have the whole table structure\n// set up in advance; assigning `\"
| Filter | \nSource | \nRendered | \n
|---|---|---|
| linky filter | \n\n <div ng-bind-html=\"snippet | linky\">\n | \n \n \n | \n
| linky target | \n\n <div ng-bind-html=\"snippetWithSingleURL | linky:'_blank'\">\n | \n \n \n | \n
| linky custom attributes | \n\n <div ng-bind-html=\"snippetWithSingleURL | linky:'_self':{rel: 'nofollow'}\">\n | \n \n \n | \n
| no filter | \n<div ng-bind=\"snippet\"> | \n \n |
\n *\n *
\n * Only enumerable properties are taken into account. Non-enumerable properties (both on `source`\n * and on `destination`) will be ignored.\n *
\n *\n * \n * `angular.copy` does not check if destination and source are of the same type. It's the\n * developer's responsibility to make sure they are compatible.\n *
\n *\n * @knownIssue\n * This is a non-exhaustive list of object types / features that are not handled correctly by\n * `angular.copy`. Note that since this functions is used by the change detection code, this\n * means binding or watching objects of these types (or that include these types) might not work\n * correctly.\n * - [`File`](https://developer.mozilla.org/docs/Web/API/File)\n * - [`Map`](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Map)\n * - [`ImageData`](https://developer.mozilla.org/docs/Web/API/ImageData)\n * - [`MediaStream`](https://developer.mozilla.org/docs/Web/API/MediaStream)\n * - [`Set`](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Set)\n * - [`WeakMap`](https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/WeakMap)\n * - [`getter`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Functions/get)/\n * [`setter`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Functions/set)\n *\n * @param {*} source The source that will be used to make a copy. Can be any type, including\n * primitives, `null`, and `undefined`.\n * @param {(Object|Array)=} destination Destination into which the source is copied. If provided,\n * must be of the same type as `source`.\n * @returns {*} The copy or updated `destination`, if `destination` was specified.\n *\n * @example\n \n \n
\n form = {{user | json}}\n leader = {{leader | json}}\n \n \n
\n \n I can add: {{a}} + {{b}} = {{ a+b }}\n
\n \n
\n \n I can add: {{a}} + {{b}} = {{ a+b }}\n\n
\n\n This renders because the controller does not fail to\n instantiate, by using explicit annotation style (see\n script.js for details)\n
\n\n Name:
\n Hello, {{name}}!\n\n
\n\n \n Hello, {{name}}!\n\n
This renders because the controller does not fail to\n instantiate, by using explicit annotation style\n (see script.js for details)\n
\n\n I can add: {{a}} + {{b}} = {{ a+b }}\n\n
\n The controller could not be instantiated, due to relying\n on automatic function annotations (which are disabled in\n strict mode). As such, the content of this section is not\n interpolated, and there should be an error in your web console.\n
\n`.\n * The new behavior is a security fix. Thus, if you need to call this function, please try to adjust\n * your code for this change and remove your use of this function as soon as possible.\n\n * Note that this only patches jqLite. If you use jQuery 3.5.0 or newer, please read the\n * [jQuery 3.5 upgrade guide](https://jquery.com/upgrade-guide/3.5/) for more details\n * about the workarounds.\n */\nfunction UNSAFE_restoreLegacyJqLiteXHTMLReplacement() {\n JQLite.legacyXHTMLReplacement = true;\n}\n\n/**\n * throw error if the argument is falsy.\n */\nfunction assertArg(arg, name, reason) {\n if (!arg) {\n throw ngMinErr('areq', 'Argument \\'{0}\\' is {1}', (name || '?'), (reason || 'required'));\n }\n return arg;\n}\n\nfunction assertArgFn(arg, name, acceptArrayAnnotation) {\n if (acceptArrayAnnotation && isArray(arg)) {\n arg = arg[arg.length - 1];\n }\n\n assertArg(isFunction(arg), name, 'not a function, got ' +\n (arg && typeof arg === 'object' ? arg.constructor.name || 'Object' : typeof arg));\n return arg;\n}\n\n/**\n * throw error if the name given is hasOwnProperty\n * @param {String} name the name to test\n * @param {String} context the context in which the name is used, such as module or directive\n */\nfunction assertNotHasOwnProperty(name, context) {\n if (name === 'hasOwnProperty') {\n throw ngMinErr('badname', 'hasOwnProperty is not a valid {0} name', context);\n }\n}\n\n/**\n * Return the value accessible from the object by path. Any undefined traversals are ignored\n * @param {Object} obj starting object\n * @param {String} path path to traverse\n * @param {boolean} [bindFnToScope=true]\n * @returns {Object} value as accessible by path\n */\n//TODO(misko): this function needs to be removed\nfunction getter(obj, path, bindFnToScope) {\n if (!path) return obj;\n var keys = path.split('.');\n var key;\n var lastInstance = obj;\n var len = keys.length;\n\n for (var i = 0; i < len; i++) {\n key = keys[i];\n if (obj) {\n obj = (lastInstance = obj)[key];\n }\n }\n if (!bindFnToScope && isFunction(obj)) {\n return bind(lastInstance, obj);\n }\n return obj;\n}\n\n/**\n * Return the DOM siblings between the first and last node in the given array.\n * @param {Array} array like object\n * @returns {Array} the inputted object or a jqLite collection containing the nodes\n */\nfunction getBlockNodes(nodes) {\n // TODO(perf): update `nodes` instead of creating a new object?\n var node = nodes[0];\n var endNode = nodes[nodes.length - 1];\n var blockNodes;\n\n for (var i = 1; node !== endNode && (node = node.nextSibling); i++) {\n if (blockNodes || nodes[i] !== node) {\n if (!blockNodes) {\n blockNodes = jqLite(slice.call(nodes, 0, i));\n }\n blockNodes.push(node);\n }\n }\n\n return blockNodes || nodes;\n}\n\n\n/**\n * Creates a new object without a prototype. This object is useful for lookup without having to\n * guard against prototypically inherited properties via hasOwnProperty.\n *\n * Related micro-benchmarks:\n * - http://jsperf.com/object-create2\n * - http://jsperf.com/proto-map-lookup/2\n * - http://jsperf.com/for-in-vs-object-keys2\n *\n * @returns {Object}\n */\nfunction createMap() {\n return Object.create(null);\n}\n\nfunction stringify(value) {\n if (value == null) { // null || undefined\n return '';\n }\n switch (typeof value) {\n case 'string':\n break;\n case 'number':\n value = '' + value;\n break;\n default:\n if (hasCustomToString(value) && !isArray(value) && !isDate(value)) {\n value = value.toString();\n } else {\n value = toJson(value);\n }\n }\n\n return value;\n}\n\nvar NODE_TYPE_ELEMENT = 1;\nvar NODE_TYPE_ATTRIBUTE = 2;\nvar NODE_TYPE_TEXT = 3;\nvar NODE_TYPE_COMMENT = 8;\nvar NODE_TYPE_DOCUMENT = 9;\nvar NODE_TYPE_DOCUMENT_FRAGMENT = 11;\n\n/**\n * @ngdoc type\n * @name angular.Module\n * @module ng\n * @description\n *\n * Interface for configuring AngularJS {@link angular.module modules}.\n */\n\nfunction setupModuleLoader(window) {\n\n var $injectorMinErr = minErr('$injector');\n var ngMinErr = minErr('ng');\n\n function ensure(obj, name, factory) {\n return obj[name] || (obj[name] = factory());\n }\n\n var angular = ensure(window, 'angular', Object);\n\n // We need to expose `angular.$$minErr` to modules such as `ngResource` that reference it during bootstrap\n angular.$$minErr = angular.$$minErr || minErr;\n\n return ensure(angular, 'module', function() {\n /** @type {Object.
\n * **Note:** Filter names must be valid AngularJS {@link expression} identifiers, such as `uppercase` or `orderBy`.\n * Names with special characters, such as hyphens and dots, are not allowed. If you wish to namespace\n * your filters, then you can use capitalization (`myappSubsectionFilterx`) or underscores\n * (`myapp_subsection_filterx`).\n *
\n */\n filter: invokeLaterAndSetModuleName('$filterProvider', 'register'),\n\n /**\n * @ngdoc method\n * @name angular.Module#controller\n * @module ng\n * @param {string|Object} name Controller name, or an object map of controllers where the\n * keys are the names and the values are the constructors.\n * @param {Function} constructor Controller constructor function.\n * @description\n * See {@link ng.$controllerProvider#register $controllerProvider.register()}.\n */\n controller: invokeLaterAndSetModuleName('$controllerProvider', 'register'),\n\n /**\n * @ngdoc method\n * @name angular.Module#directive\n * @module ng\n * @param {string|Object} name Directive name, or an object map of directives where the\n * keys are the names and the values are the factories.\n * @param {Function} directiveFactory Factory function for creating new instance of\n * directives.\n * @description\n * See {@link ng.$compileProvider#directive $compileProvider.directive()}.\n */\n directive: invokeLaterAndSetModuleName('$compileProvider', 'directive'),\n\n /**\n * @ngdoc method\n * @name angular.Module#component\n * @module ng\n * @param {string|Object} name Name of the component in camelCase (i.e. `myComp` which will match `**Note:** All element references in AngularJS are always wrapped with jQuery or\n * jqLite (such as the element argument in a directive's compile / link function). They are never raw DOM references.
\n *\n * **Note:** Keep in mind that this function will not find elements\n * by tag name / CSS selector. For lookups by tag name, try instead `angular.element(document).find(...)`\n * or `$document.find()`, or use the standard DOM APIs, e.g. `document.querySelectorAll()`.
\n *\n * ## AngularJS's jqLite\n * jqLite provides only the following jQuery methods:\n *\n * - [`addClass()`](http://api.jquery.com/addClass/) - Does not support a function as first argument\n * - [`after()`](http://api.jquery.com/after/)\n * - [`append()`](http://api.jquery.com/append/) - Contrary to jQuery, this doesn't clone elements\n * so will not work correctly when invoked on a jqLite object containing more than one DOM node\n * - [`attr()`](http://api.jquery.com/attr/) - Does not support functions as parameters\n * - [`bind()`](http://api.jquery.com/bind/) (_deprecated_, use [`on()`](http://api.jquery.com/on/)) - Does not support namespaces, selectors or eventData\n * - [`children()`](http://api.jquery.com/children/) - Does not support selectors\n * - [`clone()`](http://api.jquery.com/clone/)\n * - [`contents()`](http://api.jquery.com/contents/)\n * - [`css()`](http://api.jquery.com/css/) - Only retrieves inline-styles, does not call `getComputedStyle()`.\n * As a setter, does not convert numbers to strings or append 'px', and also does not have automatic property prefixing.\n * - [`data()`](http://api.jquery.com/data/)\n * - [`detach()`](http://api.jquery.com/detach/)\n * - [`empty()`](http://api.jquery.com/empty/)\n * - [`eq()`](http://api.jquery.com/eq/)\n * - [`find()`](http://api.jquery.com/find/) - Limited to lookups by tag name\n * - [`hasClass()`](http://api.jquery.com/hasClass/)\n * - [`html()`](http://api.jquery.com/html/)\n * - [`next()`](http://api.jquery.com/next/) - Does not support selectors\n * - [`on()`](http://api.jquery.com/on/) - Does not support namespaces, selectors or eventData\n * - [`off()`](http://api.jquery.com/off/) - Does not support namespaces, selectors or event object as parameter\n * - [`one()`](http://api.jquery.com/one/) - Does not support namespaces or selectors\n * - [`parent()`](http://api.jquery.com/parent/) - Does not support selectors\n * - [`prepend()`](http://api.jquery.com/prepend/)\n * - [`prop()`](http://api.jquery.com/prop/)\n * - [`ready()`](http://api.jquery.com/ready/) (_deprecated_, use `angular.element(callback)` instead of `angular.element(document).ready(callback)`)\n * - [`remove()`](http://api.jquery.com/remove/)\n * - [`removeAttr()`](http://api.jquery.com/removeAttr/) - Does not support multiple attributes\n * - [`removeClass()`](http://api.jquery.com/removeClass/) - Does not support a function as first argument\n * - [`removeData()`](http://api.jquery.com/removeData/)\n * - [`replaceWith()`](http://api.jquery.com/replaceWith/)\n * - [`text()`](http://api.jquery.com/text/)\n * - [`toggleClass()`](http://api.jquery.com/toggleClass/) - Does not support a function as first argument\n * - [`triggerHandler()`](http://api.jquery.com/triggerHandler/) - Passes a dummy event object to handlers\n * - [`unbind()`](http://api.jquery.com/unbind/) (_deprecated_, use [`off()`](http://api.jquery.com/off/)) - Does not support namespaces or event object as parameter\n * - [`val()`](http://api.jquery.com/val/)\n * - [`wrap()`](http://api.jquery.com/wrap/)\n *\n * jqLite also provides a method restoring pre-1.8 insecure treatment of XHTML-like tags.\n * This legacy behavior turns input like `` to ``\n * instead of `` like version 1.8 & newer do. To restore it, invoke:\n * ```js\n * angular.UNSAFE_restoreLegacyJqLiteXHTMLReplacement();\n * ```\n * Note that this only patches jqLite. If you use jQuery 3.5.0 or newer, please read the\n * [jQuery 3.5 upgrade guide](https://jquery.com/upgrade-guide/3.5/) for more details\n * about the workarounds.\n *\n * ## jQuery/jqLite Extras\n * AngularJS also provides the following additional methods and events to both jQuery and jqLite:\n *\n * ### Events\n * - `$destroy` - AngularJS intercepts all jqLite/jQuery's DOM destruction apis and fires this event\n * on all DOM nodes being removed. This can be used to clean up any 3rd party bindings to the DOM\n * element before it is removed.\n *\n * ### Methods\n * - `controller(name)` - retrieves the controller of the current element or its parent. By default\n * retrieves controller associated with the `ngController` directive. If `name` is provided as\n * camelCase directive name, then the controller for this directive will be retrieved (e.g.\n * `'ngModel'`).\n * - `injector()` - retrieves the injector of the current element or its parent.\n * - `scope()` - retrieves the {@link ng.$rootScope.Scope scope} of the current\n * element or its parent. Requires {@link guide/production#disabling-debug-data Debug Data} to\n * be enabled.\n * - `isolateScope()` - retrieves an isolate {@link ng.$rootScope.Scope scope} if one is attached directly to the\n * current element. This getter should be used only on elements that contain a directive which starts a new isolate\n * scope. Calling `scope()` on this element always returns the original non-isolate scope.\n * Requires {@link guide/production#disabling-debug-data Debug Data} to be enabled.\n * - `inheritedData()` - same as `data()`, but walks up the DOM until a value is found or the top\n * parent element is reached.\n *\n * @knownIssue You cannot spy on `angular.element` if you are using Jasmine version 1.x. See\n * https://github.com/angular/angular.js/issues/14251 for more information.\n *\n * @param {string|DOMElement} element HTML string or DOMElement to be wrapped into jQuery.\n * @returns {Object} jQuery object.\n */\n\nJQLite.expando = 'ng339';\n\nvar jqCache = JQLite.cache = {},\n jqId = 1;\n\n/*\n * !!! This is an undocumented \"private\" function !!!\n */\nJQLite._data = function(node) {\n //jQuery always returns an object on cache miss\n return this.cache[node[this.expando]] || {};\n};\n\nfunction jqNextId() { return ++jqId; }\n\n\nvar DASH_LOWERCASE_REGEXP = /-([a-z])/g;\nvar MS_HACK_REGEXP = /^-ms-/;\nvar MOUSE_EVENT_MAP = { mouseleave: 'mouseout', mouseenter: 'mouseover' };\nvar jqLiteMinErr = minErr('jqLite');\n\n/**\n * Converts kebab-case to camelCase.\n * There is also a special case for the ms prefix starting with a lowercase letter.\n * @param name Name to normalize\n */\nfunction cssKebabToCamel(name) {\n return kebabToCamel(name.replace(MS_HACK_REGEXP, 'ms-'));\n}\n\nfunction fnCamelCaseReplace(all, letter) {\n return letter.toUpperCase();\n}\n\n/**\n * Converts kebab-case to camelCase.\n * @param name Name to normalize\n */\nfunction kebabToCamel(name) {\n return name\n .replace(DASH_LOWERCASE_REGEXP, fnCamelCaseReplace);\n}\n\nvar SINGLE_TAG_REGEXP = /^<([\\w-]+)\\s*\\/?>(?:<\\/\\1>|)$/;\nvar HTML_REGEXP = /<|&#?\\w+;/;\nvar TAG_NAME_REGEXP = /<([\\w:-]+)/;\nvar XHTML_TAG_REGEXP = /<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\\w:-]+)[^>]*)\\/>/gi;\n\n// Table parts need to be wrapped with `
| \"` to `tr.innerHTML` doesn't work, etc.\nvar wrapMapIE9 = {\n option: [1, ''],\n _default: [0, '', '']\n};\n\nfor (var key in wrapMap) {\n var wrapMapValueClosing = wrapMap[key];\n var wrapMapValue = wrapMapValueClosing.slice().reverse();\n wrapMapIE9[key] = [wrapMapValue.length, '<' + wrapMapValue.join('><') + '>', ''];\n}\n\nwrapMapIE9.optgroup = wrapMapIE9.option;\n\nfunction jqLiteIsTextNode(html) {\n return !HTML_REGEXP.test(html);\n}\n\nfunction jqLiteAcceptsData(node) {\n // The window object can accept data but has no nodeType\n // Otherwise we are only interested in elements (1) and documents (9)\n var nodeType = node.nodeType;\n return nodeType === NODE_TYPE_ELEMENT || !nodeType || nodeType === NODE_TYPE_DOCUMENT;\n}\n\nfunction jqLiteHasData(node) {\n for (var key in jqCache[node.ng339]) {\n return true;\n }\n return false;\n}\n\nfunction jqLiteBuildFragment(html, context) {\n var tmp, tag, wrap, finalHtml,\n fragment = context.createDocumentFragment(),\n nodes = [], i;\n\n if (jqLiteIsTextNode(html)) {\n // Convert non-html into a text node\n nodes.push(context.createTextNode(html));\n } else {\n // Convert html into DOM nodes\n tmp = fragment.appendChild(context.createElement('div'));\n tag = (TAG_NAME_REGEXP.exec(html) || ['', ''])[1].toLowerCase();\n finalHtml = JQLite.legacyXHTMLReplacement ?\n html.replace(XHTML_TAG_REGEXP, '<$1>') :\n html;\n\n if (msie < 10) {\n wrap = wrapMapIE9[tag] || wrapMapIE9._default;\n tmp.innerHTML = wrap[1] + finalHtml + wrap[2];\n\n // Descend through wrappers to the right content\n i = wrap[0];\n while (i--) {\n tmp = tmp.firstChild;\n }\n } else {\n wrap = wrapMap[tag] || [];\n\n // Create wrappers & descend into them\n i = wrap.length;\n while (--i > -1) {\n tmp.appendChild(window.document.createElement(wrap[i]));\n tmp = tmp.firstChild;\n }\n\n tmp.innerHTML = finalHtml;\n }\n\n nodes = concat(nodes, tmp.childNodes);\n\n tmp = fragment.firstChild;\n tmp.textContent = '';\n }\n\n // Remove wrapper from fragment\n fragment.textContent = '';\n fragment.innerHTML = ''; // Clear inner HTML\n forEach(nodes, function(node) {\n fragment.appendChild(node);\n });\n\n return fragment;\n}\n\nfunction jqLiteParseHTML(html, context) {\n context = context || window.document;\n var parsed;\n\n if ((parsed = SINGLE_TAG_REGEXP.exec(html))) {\n return [context.createElement(parsed[1])];\n }\n\n if ((parsed = jqLiteBuildFragment(html, context))) {\n return parsed.childNodes;\n }\n\n return [];\n}\n\nfunction jqLiteWrapNode(node, wrapper) {\n var parent = node.parentNode;\n\n if (parent) {\n parent.replaceChild(wrapper, node);\n }\n\n wrapper.appendChild(node);\n}\n\n\n// IE9-11 has no method \"contains\" in SVG element and in Node.prototype. Bug #10259.\nvar jqLiteContains = window.Node.prototype.contains || /** @this */ function(arg) {\n // eslint-disable-next-line no-bitwise\n return !!(this.compareDocumentPosition(arg) & 16);\n};\n\n/////////////////////////////////////////////\nfunction JQLite(element) {\n if (element instanceof JQLite) {\n return element;\n }\n\n var argIsString;\n\n if (isString(element)) {\n element = trim(element);\n argIsString = true;\n }\n if (!(this instanceof JQLite)) {\n if (argIsString && element.charAt(0) !== '<') {\n throw jqLiteMinErr('nosel', 'Looking up elements via selectors is not supported by jqLite! See: http://docs.angularjs.org/api/angular.element');\n }\n return new JQLite(element);\n }\n\n if (argIsString) {\n jqLiteAddNodes(this, jqLiteParseHTML(element));\n } else if (isFunction(element)) {\n jqLiteReady(element);\n } else {\n jqLiteAddNodes(this, element);\n }\n}\n\nfunction jqLiteClone(element) {\n return element.cloneNode(true);\n}\n\nfunction jqLiteDealoc(element, onlyDescendants) {\n if (!onlyDescendants && jqLiteAcceptsData(element)) jqLite.cleanData([element]);\n\n if (element.querySelectorAll) {\n jqLite.cleanData(element.querySelectorAll('*'));\n }\n}\n\nfunction isEmptyObject(obj) {\n var name;\n\n for (name in obj) {\n return false;\n }\n return true;\n}\n\nfunction removeIfEmptyData(element) {\n var expandoId = element.ng339;\n var expandoStore = expandoId && jqCache[expandoId];\n\n var events = expandoStore && expandoStore.events;\n var data = expandoStore && expandoStore.data;\n\n if ((!data || isEmptyObject(data)) && (!events || isEmptyObject(events))) {\n delete jqCache[expandoId];\n element.ng339 = undefined; // don't delete DOM expandos. IE and Chrome don't like it\n }\n}\n\nfunction jqLiteOff(element, type, fn, unsupported) {\n if (isDefined(unsupported)) throw jqLiteMinErr('offargs', 'jqLite#off() does not support the `selector` argument');\n\n var expandoStore = jqLiteExpandoStore(element);\n var events = expandoStore && expandoStore.events;\n var handle = expandoStore && expandoStore.handle;\n\n if (!handle) return; //no listeners registered\n\n if (!type) {\n for (type in events) {\n if (type !== '$destroy') {\n element.removeEventListener(type, handle);\n }\n delete events[type];\n }\n } else {\n\n var removeHandler = function(type) {\n var listenerFns = events[type];\n if (isDefined(fn)) {\n arrayRemove(listenerFns || [], fn);\n }\n if (!(isDefined(fn) && listenerFns && listenerFns.length > 0)) {\n element.removeEventListener(type, handle);\n delete events[type];\n }\n };\n\n forEach(type.split(' '), function(type) {\n removeHandler(type);\n if (MOUSE_EVENT_MAP[type]) {\n removeHandler(MOUSE_EVENT_MAP[type]);\n }\n });\n }\n\n removeIfEmptyData(element);\n}\n\nfunction jqLiteRemoveData(element, name) {\n var expandoId = element.ng339;\n var expandoStore = expandoId && jqCache[expandoId];\n\n if (expandoStore) {\n if (name) {\n delete expandoStore.data[name];\n } else {\n expandoStore.data = {};\n }\n\n removeIfEmptyData(element);\n }\n}\n\n\nfunction jqLiteExpandoStore(element, createIfNecessary) {\n var expandoId = element.ng339,\n expandoStore = expandoId && jqCache[expandoId];\n\n if (createIfNecessary && !expandoStore) {\n element.ng339 = expandoId = jqNextId();\n expandoStore = jqCache[expandoId] = {events: {}, data: {}, handle: undefined};\n }\n\n return expandoStore;\n}\n\n\nfunction jqLiteData(element, key, value) {\n if (jqLiteAcceptsData(element)) {\n var prop;\n\n var isSimpleSetter = isDefined(value);\n var isSimpleGetter = !isSimpleSetter && key && !isObject(key);\n var massGetter = !key;\n var expandoStore = jqLiteExpandoStore(element, !isSimpleGetter);\n var data = expandoStore && expandoStore.data;\n\n if (isSimpleSetter) { // data('key', value)\n data[kebabToCamel(key)] = value;\n } else {\n if (massGetter) { // data()\n return data;\n } else {\n if (isSimpleGetter) { // data('key')\n // don't force creation of expandoStore if it doesn't exist yet\n return data && data[kebabToCamel(key)];\n } else { // mass-setter: data({key1: val1, key2: val2})\n for (prop in key) {\n data[kebabToCamel(prop)] = key[prop];\n }\n }\n }\n }\n }\n}\n\nfunction jqLiteHasClass(element, selector) {\n if (!element.getAttribute) return false;\n return ((' ' + (element.getAttribute('class') || '') + ' ').replace(/[\\n\\t]/g, ' ').\n indexOf(' ' + selector + ' ') > -1);\n}\n\nfunction jqLiteRemoveClass(element, cssClasses) {\n if (cssClasses && element.setAttribute) {\n var existingClasses = (' ' + (element.getAttribute('class') || '') + ' ')\n .replace(/[\\n\\t]/g, ' ');\n var newClasses = existingClasses;\n\n forEach(cssClasses.split(' '), function(cssClass) {\n cssClass = trim(cssClass);\n newClasses = newClasses.replace(' ' + cssClass + ' ', ' ');\n });\n\n if (newClasses !== existingClasses) {\n element.setAttribute('class', trim(newClasses));\n }\n }\n}\n\nfunction jqLiteAddClass(element, cssClasses) {\n if (cssClasses && element.setAttribute) {\n var existingClasses = (' ' + (element.getAttribute('class') || '') + ' ')\n .replace(/[\\n\\t]/g, ' ');\n var newClasses = existingClasses;\n\n forEach(cssClasses.split(' '), function(cssClass) {\n cssClass = trim(cssClass);\n if (newClasses.indexOf(' ' + cssClass + ' ') === -1) {\n newClasses += cssClass + ' ';\n }\n });\n\n if (newClasses !== existingClasses) {\n element.setAttribute('class', trim(newClasses));\n }\n }\n}\n\n\nfunction jqLiteAddNodes(root, elements) {\n // THIS CODE IS VERY HOT. Don't make changes without benchmarking.\n\n if (elements) {\n\n // if a Node (the most common case)\n if (elements.nodeType) {\n root[root.length++] = elements;\n } else {\n var length = elements.length;\n\n // if an Array or NodeList and not a Window\n if (typeof length === 'number' && elements.window !== elements) {\n if (length) {\n for (var i = 0; i < length; i++) {\n root[root.length++] = elements[i];\n }\n }\n } else {\n root[root.length++] = elements;\n }\n }\n }\n}\n\n\nfunction jqLiteController(element, name) {\n return jqLiteInheritedData(element, '$' + (name || 'ngController') + 'Controller');\n}\n\nfunction jqLiteInheritedData(element, name, value) {\n // if element is the document object work with the html element instead\n // this makes $(document).scope() possible\n if (element.nodeType === NODE_TYPE_DOCUMENT) {\n element = element.documentElement;\n }\n var names = isArray(name) ? name : [name];\n\n while (element) {\n for (var i = 0, ii = names.length; i < ii; i++) {\n if (isDefined(value = jqLite.data(element, names[i]))) return value;\n }\n\n // If dealing with a document fragment node with a host element, and no parent, use the host\n // element as the parent. This enables directives within a Shadow DOM or polyfilled Shadow DOM\n // to lookup parent controllers.\n element = element.parentNode || (element.nodeType === NODE_TYPE_DOCUMENT_FRAGMENT && element.host);\n }\n}\n\nfunction jqLiteEmpty(element) {\n jqLiteDealoc(element, true);\n while (element.firstChild) {\n element.removeChild(element.firstChild);\n }\n}\n\nfunction jqLiteRemove(element, keepData) {\n if (!keepData) jqLiteDealoc(element);\n var parent = element.parentNode;\n if (parent) parent.removeChild(element);\n}\n\n\nfunction jqLiteDocumentLoaded(action, win) {\n win = win || window;\n if (win.document.readyState === 'complete') {\n // Force the action to be run async for consistent behavior\n // from the action's point of view\n // i.e. it will definitely not be in a $apply\n win.setTimeout(action);\n } else {\n // No need to unbind this handler as load is only ever called once\n jqLite(win).on('load', action);\n }\n}\n\nfunction jqLiteReady(fn) {\n function trigger() {\n window.document.removeEventListener('DOMContentLoaded', trigger);\n window.removeEventListener('load', trigger);\n fn();\n }\n\n // check if document is already loaded\n if (window.document.readyState === 'complete') {\n window.setTimeout(fn);\n } else {\n // We can not use jqLite since we are not done loading and jQuery could be loaded later.\n\n // Works for modern browsers and IE9\n window.document.addEventListener('DOMContentLoaded', trigger);\n\n // Fallback to window.onload for others\n window.addEventListener('load', trigger);\n }\n}\n\n//////////////////////////////////////////\n// Functions which are declared directly.\n//////////////////////////////////////////\nvar JQLitePrototype = JQLite.prototype = {\n ready: jqLiteReady,\n toString: function() {\n var value = [];\n forEach(this, function(e) { value.push('' + e);});\n return '[' + value.join(', ') + ']';\n },\n\n eq: function(index) {\n return (index >= 0) ? jqLite(this[index]) : jqLite(this[this.length + index]);\n },\n\n length: 0,\n push: push,\n sort: [].sort,\n splice: [].splice\n};\n\n//////////////////////////////////////////\n// Functions iterating getter/setters.\n// these functions return self on setter and\n// value on get.\n//////////////////////////////////////////\nvar BOOLEAN_ATTR = {};\nforEach('multiple,selected,checked,disabled,readOnly,required,open'.split(','), function(value) {\n BOOLEAN_ATTR[lowercase(value)] = value;\n});\nvar BOOLEAN_ELEMENTS = {};\nforEach('input,select,option,textarea,button,form,details'.split(','), function(value) {\n BOOLEAN_ELEMENTS[value] = true;\n});\nvar ALIASED_ATTR = {\n 'ngMinlength': 'minlength',\n 'ngMaxlength': 'maxlength',\n 'ngMin': 'min',\n 'ngMax': 'max',\n 'ngPattern': 'pattern',\n 'ngStep': 'step'\n};\n\nfunction getBooleanAttrName(element, name) {\n // check dom last since we will most likely fail on name\n var booleanAttr = BOOLEAN_ATTR[name.toLowerCase()];\n\n // booleanAttr is here twice to minimize DOM access\n return booleanAttr && BOOLEAN_ELEMENTS[nodeName_(element)] && booleanAttr;\n}\n\nfunction getAliasedAttrName(name) {\n return ALIASED_ATTR[name];\n}\n\nforEach({\n data: jqLiteData,\n removeData: jqLiteRemoveData,\n hasData: jqLiteHasData,\n cleanData: function jqLiteCleanData(nodes) {\n for (var i = 0, ii = nodes.length; i < ii; i++) {\n jqLiteRemoveData(nodes[i]);\n jqLiteOff(nodes[i]);\n }\n }\n}, function(fn, name) {\n JQLite[name] = fn;\n});\n\nforEach({\n data: jqLiteData,\n inheritedData: jqLiteInheritedData,\n\n scope: function(element) {\n // Can't use jqLiteData here directly so we stay compatible with jQuery!\n return jqLite.data(element, '$scope') || jqLiteInheritedData(element.parentNode || element, ['$isolateScope', '$scope']);\n },\n\n isolateScope: function(element) {\n // Can't use jqLiteData here directly so we stay compatible with jQuery!\n return jqLite.data(element, '$isolateScope') || jqLite.data(element, '$isolateScopeNoTemplate');\n },\n\n controller: jqLiteController,\n\n injector: function(element) {\n return jqLiteInheritedData(element, '$injector');\n },\n\n removeAttr: function(element, name) {\n element.removeAttribute(name);\n },\n\n hasClass: jqLiteHasClass,\n\n css: function(element, name, value) {\n name = cssKebabToCamel(name);\n\n if (isDefined(value)) {\n element.style[name] = value;\n } else {\n return element.style[name];\n }\n },\n\n attr: function(element, name, value) {\n var ret;\n var nodeType = element.nodeType;\n if (nodeType === NODE_TYPE_TEXT || nodeType === NODE_TYPE_ATTRIBUTE || nodeType === NODE_TYPE_COMMENT ||\n !element.getAttribute) {\n return;\n }\n\n var lowercasedName = lowercase(name);\n var isBooleanAttr = BOOLEAN_ATTR[lowercasedName];\n\n if (isDefined(value)) {\n // setter\n\n if (value === null || (value === false && isBooleanAttr)) {\n element.removeAttribute(name);\n } else {\n element.setAttribute(name, isBooleanAttr ? lowercasedName : value);\n }\n } else {\n // getter\n\n ret = element.getAttribute(name);\n\n if (isBooleanAttr && ret !== null) {\n ret = lowercasedName;\n }\n // Normalize non-existing attributes to undefined (as jQuery).\n return ret === null ? undefined : ret;\n }\n },\n\n prop: function(element, name, value) {\n if (isDefined(value)) {\n element[name] = value;\n } else {\n return element[name];\n }\n },\n\n text: (function() {\n getText.$dv = '';\n return getText;\n\n function getText(element, value) {\n if (isUndefined(value)) {\n var nodeType = element.nodeType;\n return (nodeType === NODE_TYPE_ELEMENT || nodeType === NODE_TYPE_TEXT) ? element.textContent : '';\n }\n element.textContent = value;\n }\n })(),\n\n val: function(element, value) {\n if (isUndefined(value)) {\n if (element.multiple && nodeName_(element) === 'select') {\n var result = [];\n forEach(element.options, function(option) {\n if (option.selected) {\n result.push(option.value || option.text);\n }\n });\n return result;\n }\n return element.value;\n }\n element.value = value;\n },\n\n html: function(element, value) {\n if (isUndefined(value)) {\n return element.innerHTML;\n }\n jqLiteDealoc(element, true);\n element.innerHTML = value;\n },\n\n empty: jqLiteEmpty\n}, function(fn, name) {\n /**\n * Properties: writes return selection, reads return first value\n */\n JQLite.prototype[name] = function(arg1, arg2) {\n var i, key;\n var nodeCount = this.length;\n\n // jqLiteHasClass has only two arguments, but is a getter-only fn, so we need to special-case it\n // in a way that survives minification.\n // jqLiteEmpty takes no arguments but is a setter.\n if (fn !== jqLiteEmpty &&\n (isUndefined((fn.length === 2 && (fn !== jqLiteHasClass && fn !== jqLiteController)) ? arg1 : arg2))) {\n if (isObject(arg1)) {\n\n // we are a write, but the object properties are the key/values\n for (i = 0; i < nodeCount; i++) {\n if (fn === jqLiteData) {\n // data() takes the whole object in jQuery\n fn(this[i], arg1);\n } else {\n for (key in arg1) {\n fn(this[i], key, arg1[key]);\n }\n }\n }\n // return self for chaining\n return this;\n } else {\n // we are a read, so read the first child.\n // TODO: do we still need this?\n var value = fn.$dv;\n // Only if we have $dv do we iterate over all, otherwise it is just the first element.\n var jj = (isUndefined(value)) ? Math.min(nodeCount, 1) : nodeCount;\n for (var j = 0; j < jj; j++) {\n var nodeValue = fn(this[j], arg1, arg2);\n value = value ? value + nodeValue : nodeValue;\n }\n return value;\n }\n } else {\n // we are a write, so apply to all children\n for (i = 0; i < nodeCount; i++) {\n fn(this[i], arg1, arg2);\n }\n // return self for chaining\n return this;\n }\n };\n});\n\nfunction createEventHandler(element, events) {\n var eventHandler = function(event, type) {\n // jQuery specific api\n event.isDefaultPrevented = function() {\n return event.defaultPrevented;\n };\n\n var eventFns = events[type || event.type];\n var eventFnsLength = eventFns ? eventFns.length : 0;\n\n if (!eventFnsLength) return;\n\n if (isUndefined(event.immediatePropagationStopped)) {\n var originalStopImmediatePropagation = event.stopImmediatePropagation;\n event.stopImmediatePropagation = function() {\n event.immediatePropagationStopped = true;\n\n if (event.stopPropagation) {\n event.stopPropagation();\n }\n\n if (originalStopImmediatePropagation) {\n originalStopImmediatePropagation.call(event);\n }\n };\n }\n\n event.isImmediatePropagationStopped = function() {\n return event.immediatePropagationStopped === true;\n };\n\n // Some events have special handlers that wrap the real handler\n var handlerWrapper = eventFns.specialHandlerWrapper || defaultHandlerWrapper;\n\n // Copy event handlers in case event handlers array is modified during execution.\n if ((eventFnsLength > 1)) {\n eventFns = shallowCopy(eventFns);\n }\n\n for (var i = 0; i < eventFnsLength; i++) {\n if (!event.isImmediatePropagationStopped()) {\n handlerWrapper(element, event, eventFns[i]);\n }\n }\n };\n\n // TODO: this is a hack for angularMocks/clearDataCache that makes it possible to deregister all\n // events on `element`\n eventHandler.elem = element;\n return eventHandler;\n}\n\nfunction defaultHandlerWrapper(element, event, handler) {\n handler.call(element, event);\n}\n\nfunction specialMouseHandlerWrapper(target, event, handler) {\n // Refer to jQuery's implementation of mouseenter & mouseleave\n // Read about mouseenter and mouseleave:\n // http://www.quirksmode.org/js/events_mouse.html#link8\n var related = event.relatedTarget;\n // For mousenter/leave call the handler if related is outside the target.\n // NB: No relatedTarget if the mouse left/entered the browser window\n if (!related || (related !== target && !jqLiteContains.call(target, related))) {\n handler.call(target, event);\n }\n}\n\n//////////////////////////////////////////\n// Functions iterating traversal.\n// These functions chain results into a single\n// selector.\n//////////////////////////////////////////\nforEach({\n removeData: jqLiteRemoveData,\n\n on: function jqLiteOn(element, type, fn, unsupported) {\n if (isDefined(unsupported)) throw jqLiteMinErr('onargs', 'jqLite#on() does not support the `selector` or `eventData` parameters');\n\n // Do not add event handlers to non-elements because they will not be cleaned up.\n if (!jqLiteAcceptsData(element)) {\n return;\n }\n\n var expandoStore = jqLiteExpandoStore(element, true);\n var events = expandoStore.events;\n var handle = expandoStore.handle;\n\n if (!handle) {\n handle = expandoStore.handle = createEventHandler(element, events);\n }\n\n // http://jsperf.com/string-indexof-vs-split\n var types = type.indexOf(' ') >= 0 ? type.split(' ') : [type];\n var i = types.length;\n\n var addHandler = function(type, specialHandlerWrapper, noEventListener) {\n var eventFns = events[type];\n\n if (!eventFns) {\n eventFns = events[type] = [];\n eventFns.specialHandlerWrapper = specialHandlerWrapper;\n if (type !== '$destroy' && !noEventListener) {\n element.addEventListener(type, handle);\n }\n }\n\n eventFns.push(fn);\n };\n\n while (i--) {\n type = types[i];\n if (MOUSE_EVENT_MAP[type]) {\n addHandler(MOUSE_EVENT_MAP[type], specialMouseHandlerWrapper);\n addHandler(type, undefined, true);\n } else {\n addHandler(type);\n }\n }\n },\n\n off: jqLiteOff,\n\n one: function(element, type, fn) {\n element = jqLite(element);\n\n //add the listener twice so that when it is called\n //you can remove the original function and still be\n //able to call element.off(ev, fn) normally\n element.on(type, function onFn() {\n element.off(type, fn);\n element.off(type, onFn);\n });\n element.on(type, fn);\n },\n\n replaceWith: function(element, replaceNode) {\n var index, parent = element.parentNode;\n jqLiteDealoc(element);\n forEach(new JQLite(replaceNode), function(node) {\n if (index) {\n parent.insertBefore(node, index.nextSibling);\n } else {\n parent.replaceChild(node, element);\n }\n index = node;\n });\n },\n\n children: function(element) {\n var children = [];\n forEach(element.childNodes, function(element) {\n if (element.nodeType === NODE_TYPE_ELEMENT) {\n children.push(element);\n }\n });\n return children;\n },\n\n contents: function(element) {\n return element.contentDocument || element.childNodes || [];\n },\n\n append: function(element, node) {\n var nodeType = element.nodeType;\n if (nodeType !== NODE_TYPE_ELEMENT && nodeType !== NODE_TYPE_DOCUMENT_FRAGMENT) return;\n\n node = new JQLite(node);\n\n for (var i = 0, ii = node.length; i < ii; i++) {\n var child = node[i];\n element.appendChild(child);\n }\n },\n\n prepend: function(element, node) {\n if (element.nodeType === NODE_TYPE_ELEMENT) {\n var index = element.firstChild;\n forEach(new JQLite(node), function(child) {\n element.insertBefore(child, index);\n });\n }\n },\n\n wrap: function(element, wrapNode) {\n jqLiteWrapNode(element, jqLite(wrapNode).eq(0).clone()[0]);\n },\n\n remove: jqLiteRemove,\n\n detach: function(element) {\n jqLiteRemove(element, true);\n },\n\n after: function(element, newElement) {\n var index = element, parent = element.parentNode;\n\n if (parent) {\n newElement = new JQLite(newElement);\n\n for (var i = 0, ii = newElement.length; i < ii; i++) {\n var node = newElement[i];\n parent.insertBefore(node, index.nextSibling);\n index = node;\n }\n }\n },\n\n addClass: jqLiteAddClass,\n removeClass: jqLiteRemoveClass,\n\n toggleClass: function(element, selector, condition) {\n if (selector) {\n forEach(selector.split(' '), function(className) {\n var classCondition = condition;\n if (isUndefined(classCondition)) {\n classCondition = !jqLiteHasClass(element, className);\n }\n (classCondition ? jqLiteAddClass : jqLiteRemoveClass)(element, className);\n });\n }\n },\n\n parent: function(element) {\n var parent = element.parentNode;\n return parent && parent.nodeType !== NODE_TYPE_DOCUMENT_FRAGMENT ? parent : null;\n },\n\n next: function(element) {\n return element.nextElementSibling;\n },\n\n find: function(element, selector) {\n if (element.getElementsByTagName) {\n return element.getElementsByTagName(selector);\n } else {\n return [];\n }\n },\n\n clone: jqLiteClone,\n\n triggerHandler: function(element, event, extraParameters) {\n\n var dummyEvent, eventFnsCopy, handlerArgs;\n var eventName = event.type || event;\n var expandoStore = jqLiteExpandoStore(element);\n var events = expandoStore && expandoStore.events;\n var eventFns = events && events[eventName];\n\n if (eventFns) {\n // Create a dummy event to pass to the handlers\n dummyEvent = {\n preventDefault: function() { this.defaultPrevented = true; },\n isDefaultPrevented: function() { return this.defaultPrevented === true; },\n stopImmediatePropagation: function() { this.immediatePropagationStopped = true; },\n isImmediatePropagationStopped: function() { return this.immediatePropagationStopped === true; },\n stopPropagation: noop,\n type: eventName,\n target: element\n };\n\n // If a custom event was provided then extend our dummy event with it\n if (event.type) {\n dummyEvent = extend(dummyEvent, event);\n }\n\n // Copy event handlers in case event handlers array is modified during execution.\n eventFnsCopy = shallowCopy(eventFns);\n handlerArgs = extraParameters ? [dummyEvent].concat(extraParameters) : [dummyEvent];\n\n forEach(eventFnsCopy, function(fn) {\n if (!dummyEvent.isImmediatePropagationStopped()) {\n fn.apply(element, handlerArgs);\n }\n });\n }\n }\n}, function(fn, name) {\n /**\n * chaining functions\n */\n JQLite.prototype[name] = function(arg1, arg2, arg3) {\n var value;\n\n for (var i = 0, ii = this.length; i < ii; i++) {\n if (isUndefined(value)) {\n value = fn(this[i], arg1, arg2, arg3);\n if (isDefined(value)) {\n // any function which returns a value needs to be wrapped\n value = jqLite(value);\n }\n } else {\n jqLiteAddNodes(value, fn(this[i], arg1, arg2, arg3));\n }\n }\n return isDefined(value) ? value : this;\n };\n});\n\n// bind legacy bind/unbind to on/off\nJQLite.prototype.bind = JQLite.prototype.on;\nJQLite.prototype.unbind = JQLite.prototype.off;\n\n\n// Provider for private $$jqLite service\n/** @this */\nfunction $$jqLiteProvider() {\n this.$get = function $$jqLite() {\n return extend(JQLite, {\n hasClass: function(node, classes) {\n if (node.attr) node = node[0];\n return jqLiteHasClass(node, classes);\n },\n addClass: function(node, classes) {\n if (node.attr) node = node[0];\n return jqLiteAddClass(node, classes);\n },\n removeClass: function(node, classes) {\n if (node.attr) node = node[0];\n return jqLiteRemoveClass(node, classes);\n }\n });\n };\n}\n\n/**\n * Computes a hash of an 'obj'.\n * Hash of a:\n * string is string\n * number is number as string\n * object is either result of calling $$hashKey function on the object or uniquely generated id,\n * that is also assigned to the $$hashKey property of the object.\n *\n * @param obj\n * @returns {string} hash string such that the same input will have the same hash string.\n * The resulting string key is in 'type:hashKey' format.\n */\nfunction hashKey(obj, nextUidFn) {\n var key = obj && obj.$$hashKey;\n\n if (key) {\n if (typeof key === 'function') {\n key = obj.$$hashKey();\n }\n return key;\n }\n\n var objType = typeof obj;\n if (objType === 'function' || (objType === 'object' && obj !== null)) {\n key = obj.$$hashKey = objType + ':' + (nextUidFn || nextUid)();\n } else {\n key = objType + ':' + obj;\n }\n\n return key;\n}\n\n// A minimal ES2015 Map implementation.\n// Should be bug/feature equivalent to the native implementations of supported browsers\n// (for the features required in Angular).\n// See https://kangax.github.io/compat-table/es6/#test-Map\nvar nanKey = Object.create(null);\nfunction NgMapShim() {\n this._keys = [];\n this._values = [];\n this._lastKey = NaN;\n this._lastIndex = -1;\n}\nNgMapShim.prototype = {\n _idx: function(key) {\n if (key !== this._lastKey) {\n this._lastKey = key;\n this._lastIndex = this._keys.indexOf(key);\n }\n return this._lastIndex;\n },\n _transformKey: function(key) {\n return isNumberNaN(key) ? nanKey : key;\n },\n get: function(key) {\n key = this._transformKey(key);\n var idx = this._idx(key);\n if (idx !== -1) {\n return this._values[idx];\n }\n },\n has: function(key) {\n key = this._transformKey(key);\n var idx = this._idx(key);\n return idx !== -1;\n },\n set: function(key, value) {\n key = this._transformKey(key);\n var idx = this._idx(key);\n if (idx === -1) {\n idx = this._lastIndex = this._keys.length;\n }\n this._keys[idx] = key;\n this._values[idx] = value;\n\n // Support: IE11\n // Do not `return this` to simulate the partial IE11 implementation\n },\n delete: function(key) {\n key = this._transformKey(key);\n var idx = this._idx(key);\n if (idx === -1) {\n return false;\n }\n this._keys.splice(idx, 1);\n this._values.splice(idx, 1);\n this._lastKey = NaN;\n this._lastIndex = -1;\n return true;\n }\n};\n\n// For now, always use `NgMapShim`, even if `window.Map` is available. Some native implementations\n// are still buggy (often in subtle ways) and can cause hard-to-debug failures. When native `Map`\n// implementations get more stable, we can reconsider switching to `window.Map` (when available).\nvar NgMap = NgMapShim;\n\nvar $$MapProvider = [/** @this */function() {\n this.$get = [function() {\n return NgMap;\n }];\n}];\n\n/**\n * @ngdoc function\n * @module ng\n * @name angular.injector\n * @kind function\n *\n * @description\n * Creates an injector object that can be used for retrieving services as well as for\n * dependency injection (see {@link guide/di dependency injection}).\n *\n * @param {Array. |